Air King 9219 Assembly, Operation, Maintenance, Solvents, Motor is Permanently Lubricated

MODEL 9219

ASSEMBLY

NOTE: For 46" height use lower hole on handle; for 48" height,		the Handles and Rubber Spacers into the Pivot Bracket Assembly
use upper hole on handle.		in Rear Grill.
1.	Attach one Front Leg (1) and one Back Leg (2) into lower of	9. Check all bolts for tightness.
	two Holes of each Handle (3) using a 1-3/4" Bolt (4) and a	10. Lift the stand to its upright position.
	1/4"-20 Nut (5).	OPERATION
2.	Connect the two Leg and Handle Assemblies, with one Cross
		1. Plug in cord and select desired operating speed with knob on
	Brace (6) using a 1-3/4" Bolt (4) and a 1/4"-20 Nut (5) through
		back of fan.
	the upper Hole in each Handle.
		WARNING: This Fan should be used only in a clean, dry environment.
3.	Bolt Bottom Cross Braces (6) and Struts (7) together using the
		Mounting this product in any way other then specified in the instruction
	1-3/4" Bolts (4) and the 1/4"-20 Nuts (5).
		sheet will null and void the manufacturers waranty.
4.	To attach Wheels, insert 2-1/4" Axle Bolt (8) and Metal Spacer
		MAINTENANCE
	(9), through Wheel (10), and into the bottom Hole on each Back
	Leg. Secure with 1/4" -20 Nuts (5).	WARNING: ALWAYS UNPLUG THE CORD BEFORE SERVICING.
NOTE: Lengthened Wheel Hub side goes towards Leg, Spacing		Cleaning: Use a soft cloth and a mild soap solution such as liquid dish
Wheel away from Tube when assembled.		washing detergent.
		CAUTION: Do not use gasoline, benzine, thinner, harsh clean-
5.	Slip Plastic Caps (11) over tubing ends at the top of the Handles
		ers, etc. as they will damage the Fan. NEVER use ALCOHOL OR
	and also at the bottom of the Front Legs.
		SOLVENTS.
6.	Lay Fan on the floor, front side down.
		Dry all parts with a soft cloth completely before reconnecting to

MODELO 9219

28

26

29

23

22

27 28

21	25
24
19

7. Place Stand on floor, Wheels up, with Handles on each side of	power supply.
Fan. Align Handle Holes with the Pivot Bracket Assembly (21)	Storage: When not in use, keep unit in a clean dry place.
in Rear Grill.	MOTOR IS PERMANENTLY LUBRICATED.

8.Place Rubber Spacers (12) between the Stand Handles and sides of the Fan. Then thread Fan Support Knobs (13) through

NOTE: Bend of Handle must be toward side of Wheels.

17

16

15

3	2
0	1

1921

20

22

Note: Ver en la página 6 el Ensamblado del Soporte. El Número de Identificación de cada Artículo está en la Lista de Piezas.

NO. DE	NÚMERO
REF.	DE PIEZA	DESCRIPCIÓN	CANT.
1	5062034B	Patas (Vea Nota)	2

	11	12
13
12
		21
		3
5		4
4
	2	6
		5

9 10

5

7

11

					12
					13
					21
					3
5
					6
		2
				10	9
					4
					8
5		7			1
	1		5		4

14

18

2			5062034B	Patas (Vea Nota)	2
3		5062031B	Asas	2
	4		*****	Pernos de 1/4" -20 x 1 3/4"	8
5			*****	Tuerca con Rosca 1/4" -20	10
	6		5062022B	Barra Transversal	3
	7		5062030B	Puntales	2
8			*****	Pernos Eje de 1/4" -20 x 2-1/4"	2
	9		*****	Espaciadores Metálicos Para las Ruedas	2
10		2011902	Ruedas	2
11			2090572	Tapas Plásticas	4
	12		*****	Arandelas de Goma	2
13		5010106	Perillas de Soporte del Ventilador	2
14		*	Perilla del Interruptor	1
	15		*	Tornillo de 6-32 x 1/4"	1
16		*	Cubierta del Motor	1
17		*	Interruptor	1
	18		*	Juego de Alambre Flexible	1
19	*	Tornillo #6 x 5/8" PTH	3
20		02030021B	Motor	1
21		05060016	Soporte Pivote con Inserto	2
22		2091162	Tornillo #8 x 1/2 Tipo F	4
23		5097125BK	Rejilla Trasera	1
24		5090045	Tornillo 10-32 x 1/2 HWH SERR F-ZP	1
25		5090044	Tornillo Prisionera de 1/4-28 x 3/8"	1
26		5082045BK	Paleta	1
27		5097120BK	Rejilla Delantera	1

8

5

6

28	2091143	Tornillo #8 x 3/8" PPH Tipo F	4
29	02084613	Ojo de Buey	1

11

Rev. M 9/07

	11
4	4
2	5084008

Rev. M 9/07

7

* Incluido en el número 02030021B motriz de la parte

*****Contenidas en la Bolsa de Piezas. (Número de pieza: 2098164A) 5084008