Dear Customer,
Thank you for the confidence you have placed in our company.
All our products are the result of consolidated experience in the design and production of ap- pliances for household cleaning, and have been subject to meticulous technical tests.
This manual is designed to help you make the most of your appliance and to fully appreciate its superb quality.
We are certain that if you follow our suggestions, this appliance will give you absolute satisfac- tion and many years of service, while also easing your daily household cleaning tasks.
COMPONENTS DESCRIPTION
1)Handgrip
2)On/off switch
3)Suction power control (Electronic model only)
4)Air exhaust
5)
6)Dust bag holder hatch cover
7)Carpet/floor brush
8)Upholstery nozzle
9)Crevice tool
10)Extension tube
SETTING UP FOR USE
Assembling the handgrip
To fit the handgrip to the body of the broom, simply push it in firmly until it clicks into place (fig.1).
To disengage, press on the spring clips with one hand while pulling the handgrip up- wards with the other (fig.2).
Fitting on the accessories
To fit your machine with the correct accesso- ry, simply push in the attachment until firmly in place.
a)Carpet/floor brush: effectively vacuums up dust from both hard floors and car- pets or rugs.
For hard floors, the brush lever should be set to the bristles extended symbol
( 
).
For carpets or rugs, the lever should be set to the opposite bristles withdrawn
symbol ( 
) (fig.3).
B)
C)Crevice tool: Ideal for cleaning corners, skirting boards, etc. (fig. 5).
Cleaning under low furniture
Remove attachment (if any) and carefully fit the extension tube onto the handgrip. Fit the recommended attachment and proceed to clean the desired area. To obtain maximum suction power, rotate the cleaner left or right whilst using forward and backward move- ments (Fig. 6).
Cleaning high areas or ceilings
Fit the handgrip with the extension tube and the recommended attachment. Use both hands to hold the appliance.
Operating Instructions
Unwind the power cord and plug in the ma- chine. The cord storage hook swivels for quick release (fig.7).
Switching on the machine
To operate the machine, switch (2) must be on I position. The Electronic model has a slide switch for electronic suction control.
It is recommended to position the slide switch to the minimum setting before switching on the machine (fig. 8).
Electronic controls allow you to adjust suc- tion power to the surface to be cleaned.
•Maximum power: for carpets, corners, bor- ders, heavy dirt (grit, bread crumbs, etc.).
•Medium power: for energy saving and
5