dbx Pro 376 user manual Getting Started, Front Panel Controls

Page 11

376

Getting Started

Section 1

1.2 Front Panel Controls

Instrument Input

This unbalanced high-impedance input connection is used to insert an instrument signal direct- ly into the preamp. Use the LINE switch to make instrument input or the rear panel line input active. Plugging into the instrument jack will override the rear panel 1/4” input jack (line input must be selected).

Line Select Switch

This switch, when lit, selects the rear line input or front panel instrument input (when some- thing is connected) as the source signal of the 376.

Drive Control

This control sets the amount of gain at the input of the vacuum tube stage. The range of gain available is +30 to +60 dB (-15 to +15 dB when LINE INPUT is selected).

Drive meter

This 4-segment LED meter indicates the input drive signal.

+48 Volt Switch

This switch activates phantom power for condenser microphones on pins 2 and 3 of the XLR mic input. You should connect your microphone before turning on the phantom power to pre- vent damage to your microphone. Be sure to always lower levels prior to using the +48 Volt Switch.

20db Pad Switch

This switch attenuates the microphone input signal by 20dB.

Phase Switch

This switch inverts the phase of the incoming signal at the Mic input by swapping pins 2 and 3 on the XLR connector.

Note- The +48 Vo lt , 20dB Pad and Phase functions are only available when the microphone input is in use.

Low Cut Switch

This switch places a 12 dB per octave shelving high pass filter in the signal path. The knee frequency of the Low Cut filter is 75 Hz. This filter is very useful for removing low frequency rumble or handling noise from a microphone input signal.

®

376 User Manual

3

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 376 Important Safety Instructions Declaration Conformity 376 Table of ContentsIntro Defining IntroductionWarranty Introduction Service Contact InfoInstallation Recommendations Getting Getting Started Rear Panel Connections IEC Power Cord ReceptacleFront Panel Controls Getting StartedSection Front Panel Type IV conversion system controls Meter Select Switch376 Analog Connection to a Mixing Console Analog ApplicationsBasic Analog Connection Direct Connection to a Recorder 376 Digital Digital Output Rear Panel Connections Digital Applications Digital Output Front FunctionsSync Input Sample Rate Selection SectionDirect Connection to a DAW CPU Digital ApplicationsDirect Connection to a Digital Mixer 376A/D Conversion Multi-Tracking to Digital Digital Applications Analog and Digital Output Application Appendix Sync Input Info AppendixUser Block DiagramType IV White Paper By Roger JohnsonAppendix C Appendix C 376 Clip Level High-Frequency Information Completely Lost Truncation 376Microphone Input SpecificationsHarman International Company
Related manuals
Manual 2 pages 12.1 Kb

376 specifications

The dbx Pro 376 is a highly regarded unit in the realm of audio processing, combining advanced technologies and user-friendly features to enhance sound quality and versatility in various professional settings. As a dual-channel microphone preamp, the Pro 376 is designed to deliver exceptional audio fidelity, making it an ideal choice for recording studios, live sound applications, and broadcast environments.

One of the standout features of the dbx Pro 376 is its high-performance microphone preamplifiers. These preamps are equipped with Ultra-Dynamic Range technology, which provides a broad dynamic range and low noise floor. This ensures that every subtle nuance of the audio signal is captured accurately, resulting in clear and detailed recordings. Furthermore, each channel boasts switchable phantom power, allowing for compatibility with a wide array of condenser microphones.

The Pro 376 also includes dbx's proprietary DriveReduction technology. This innovative processing feature allows users to apply a transparent form of compression that maintains the integrity of the original sound while controlling dynamics. By providing versatility in managing signal levels, DriveReduction becomes an invaluable tool in both live and studio settings.

Another essential aspect of this unit is its bandwidth-efficient, 3-band equalizer with a dedicated low-cut filter. The EQ section permits precision tuning of frequencies, enabling audio engineers to shape the sound to fit specific artistic visions. It offers both musicality and functionality, ensuring that the end product meets professional standards.

Durability is also a hallmark of the dbx Pro 376. Built with rugged metal housing, it’s designed to withstand the rigors of the road, making it a reliable choice for touring musicians and sound professionals. Its intuitive front-panel controls allow for easy operation, while its compact design ensures it fits seamlessly into any audio rack setup.

The dbx Pro 376 incorporates balanced XLR inputs and outputs, ensuring minimal signal loss and optimal compatibility with other audio equipment. The unit is also versatile enough to function in various setups, be it for recording, live performances, or broadcast.

In summary, the dbx Pro 376 stands out with its premium microphone preamps, innovative processing technologies, user-friendly interface, and robust build quality. These features combine to make it an essential tool for any audio professional seeking to elevate their sound production capabilities. Whether in a studio or on stage, the Pro 376 delivers impressive results, bringing audio vision to life.
Top Page Image Contents