Euro-Pro V2022 manual Speed Cordless Sweeper, Model Volt DC

Page 1

IMPORTANT

2 Speed Cordless Sweeper

Model: V2022

6 Volt DC

To Maximize the life of your NiCd batteries:

1.Charge for a minimum of 20 hours before initial use. Failure to do so will reduce the product’s battery life significantly.

2.Do not store unit with the charging adapter attached and plugged in.

3.Only recharge when the batteries are fully discharged (or as close to fully discharged as possible).

4.Do not store in areas of high temperature or humidity.

5.After 3 months of non-use, the product should be fully discharged and then recharged to maximize battery power.

6.Use only the charger supplied with the product. If other chargers are used, the batteries can fail causing damage to the battery, product, or personal property.

NiCd batteries have a long useful life but at some time they will need to be replaced. To purchase replacement batteries, visit www.sharkvac.com

Note: 1. The On/Off switch must be in the “Off” position in order to charge the unit. If the charging indicator does not light, depress the On/Off switch once.

2.If the product has never been used or has been stored for an extended period of time without use – it will take several complete charge and discharge cycles to realize the full operational time of your product.

EURO-PRO Operating LLC

Boston, MA 02465

Tel. : 1 (800) 798-7398

www.sharkvac.com

Copyright © EURO-PROOPERATING LLC 2008

Image 1
Contents Model Volt DC Speed Cordless SweeperPage V2022 Read ALL Instructions Before Using Your Cordless SweeperParts and Components TroubleshootingOperating Instructions Care And MaintenanceAssembling Your Cordless Sweeper Charging Instructions Changing The Rotating Brush, Gear Box & SqueegeeBattery Removal & Disposal Cleaning the Dust Cup ContainerTo Maximize The Life Of Your Ni-cd Batteries How To Operate Your Cordless Sweeper Removal of Battery PackAnti-Jam Brush Roll Feature