3Switch off the machine, empty the collection tank and rinse clean
4Pour cold water in to the collection tank to fill up to the white mark and recommence cleaning.
2Inspect the Hose Assembly for any signs of damage. If damaged do not repair, contact the supplier of this product. Do not use until repaired.
3Inspect wheels and castors to ensure all securing bolts are fully tightened.
Maintenance | Air purification/filtration |
|
Warning: Disconnect machine from the mains before cleaning or maintenance.
Daily maintenance
To be carried out every day or every 10 hours of operation.
1Wash the hose by sucking one or two litres of water from a basin into the recovery tank.
2Unplug the machine and wipe down with a clean cloth.
3Empty the collection tank, rinse and wipe down.
4If chemical or detergent has been used clean the detergent tank and pump by putting 1 litre of clean water in the chemical tank and pump this out using the detergent switch on the handle.
5Remove the foam filter and the collection
tank foam panel, wash in water and refit.
•Take care not to damage the foam or filter mesh. If either becomes torn DO NOT use the machine and replace damaged parts
immediately.
6Wipe down the inside of the underside of the machine head.
7Always wash the cleaning attachments in hot soapy water.
Do not immerse the machine or the
hose assembly in water.
8Wrap the cable around the handle before storage.
Weekly maintenance
To be carried out every week or every 50 hours of operation.
As for daily maintenance plus the following:
1Inspect the power cord for any signs of damage. If damaged do not repair, contact the supplier of this product. Do not use until repaired.
1Always ensure the machine is switched off prior to selecting the air purification mode.
2Remove the top cover of the collection tank ‡ and pour clean cold water into the collection tank up to the white mark in the base of the tank.
3Add in the correct quantity of fragrance to the water in the collection tank.
4Replace top cover.
5Do not connect the hose assembly to the machine.
6Position the machine in the room to be purified.
7Ensure vacuum mode 1 is selected on mode switch.
8Plug in the machine power cord.
9Set the vacuum power using the "Vacuum Control" knob on top of the machine.
10Switch on power (without fixing the hose assembly), the "Vacuum On" light will illuminate and "Pur" will be displayed on the temperature display showing that you have selected the air purification mode.
11Leave the machine to recirculate the air in the room.
12On completion of the air purification empty the collection tank and rinse clean.
Cleaning altro, vinyl, tiled and stone floors
1It is advisable to vacuum the floors using a tub vacuum prior to steam cleaning.
2Fit the extension tubes to the hose assembly and lock in place.
3Fit the
4When cleaning tiles or stone floors fit the universal brush fitting to the multi function nozzle.
7