Dyson DC 01 important safety instructions Your Dyson has a built-in thermal cut-out to protect it

Page 6

Important

S

 

S-Level

Check both electrostatic

 

filters whenever the bin is

 

emptied and replace at

 

3

months.

 

least every 3

 

 

Please note that if the filters are not checked regularly and changed

 

as required, the motor may overheat, which will cause the thermal

 

cut-out to operate.

 

 

 

 

 

 

 

NOTE: Vacuuming builder’s dust and some carpet fresheners may

 

cause the filters to require changing more frequently. (Dyson

 

does not recommend the use of carpet fresheners).

 

 

 

 

 

Replacement filters are available from your local retailer or

 

direct from Dyson. Call or fax the Helpline for orders.

 

 

 

 

 

IMPORTANT: Use only genuine Dyson filters, which

 

have been tested and approved for this cleaner.

 

NOTE

 

 

 

 

 

 

 

Your Dyson has a built-in thermal cut-out to protect it in the

detailed in this operating manual. (Remember also to check the fuse in the

event of a restriction to the airflow and may suddenly stop

plug). Having established that there are no blockages and that the filters

working temporarily if you do not change the filters at the

have been replaced within the stated time, leave your vacuum cleaner

stated time, or if blockages are not cleared immediately.

unplugged for 60 minutes and then try using it again.

If the vacuum cleaner suddenly stops working (ie. the motor makes no

If the vacuum cleaner still does not work, please call Dyson

sound when switched on) then please check your cleaner for blockages as

Customer Care (Tel: 01666 827272).

IMPORTANT A LW AY S U N P L U G T H E V A C U U M C L E A N E R F R O M T H E W A L L S O C K E T B E F O R E I N S P E C T I N G I T

NOTE

 

 

IMPORTANT

 

Check that your supply corresponds to that shown on the rating plate. The appliance must

The wires in the mains lead are coloured in accordance with the following codes.

only be used as rated, it should be fitted with an ASTA approved fuse to BS1362.

Brown – Live

 

European conformity information A sample of this product has been tested and found

 

Blue – Neutral

 

to be in conformity with the following European Directives: 73/23/EEC Low voltage (safety)

 

 

 

 

 

 

Directive, 93/68/EEC CE Marketing Directive and 89/336/EEC EMC Directive.

As the colours of the wires in the mains lead may not correspond with the colours or

For your convenience this appliance is supplied with a plug which is fitted with a 13amp

markings identifying the terminals in your plug, proceed as follows:

fuse of the appropriate rating.

 

 

The wire which is coloured Blue must be connected to the terminal which is marked with

Never put the plug into the socket outlet without the fuse cover fitted. Replacement fuse

the letter N or coloured Black.

 

covers are available from Dyson Customer Care. If the plug supplied is not suitable for

The wire that is coloured Brown must be connected to the terminal which is marked with

your socket outlet, it should be cut off and destroyed/safely disposed of. Warning: Under

no circumstances should the severed plug be inserted into a 13A socket, serious

the letter L or coloured Red.

 

danger of electric shock would result from the exposed wires.

Neither wire should be connected to the earth terminal of a three pin plug which is marked

The mains lead can then be shortened to the minimum required length, suitably prepared

with the letter E or

 

 

or coloured Green or Green and Yellow.

and the correct style of plug to suit your household wiring system should be fitted. The

Always ensure that the cable clamp is fitted and that it clamps the cable outer and NOT

following wiring instructions should be followed. If in doubt, consult a qualified

the coloured wires.

 

electrician.

 

 

 

Unwanted products and the environment Should you find that your product needs

If the supply cord of the appliance is damaged, disconnect the appliance from the socket

replacing one day, or is of no further use to you, think of protecting the environment. Dyson

outlet immediately. The supply cord must be replaced and only by Dyson Appliances Ltd.

will accept your old products and recycle them in an environmentally friendly way.

or their appointed agent as special purpose tools and service techniques are required.

 

Helpline

01666 827272

D Y S O N C U S T O M E R C A R E

 

T E T B U R Y H I L L

 

 

 

 

 

 

 

 

Facsimile

01666 827298

M A L M E S B U R Y

 

W I L T S H I R E

 

Contact for all service assistance

E N G L A N D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S N 1 6 O R P

Image 6
Contents Operating manual Getting started Clear bin capacity Carrying handle How to useFilter changing Optional clear bin cleaning Clear bin removal & emptyingThread removal Remove soleplate Line up brush barCentralise belt Rotate brush bar by Hand to centralise SoleplateCheck filters Check belt & soleplate Clean shroudCheck cleaner head & flaps Check wand/hoseWorking temporarily if you do not change the filters at Your Dyson has a built-in thermal cut-out to protect itEvent of a restriction to the airflow and may suddenly stop Stated time, or if blockages are not cleared immediately

DC 01 specifications

The Dyson DC01, launched in 1993, represents a significant milestone in vacuum cleaner technology. As one of the first models to utilize Dyson's pioneering cyclonic separation technology, the DC01 changed the way people thought about vacuum cleaning and air filtration. This revolutionary approach eliminates the need for bags, providing a more efficient cleaning experience while maintaining strong suction power over time.

One of the standout features of the Dyson DC01 is its distinctive design. With its eye-catching yellow and purple color scheme, the vacuum cleaner is easily recognizable. The transparent bin showcases the cyclonic technology in action, which captures dust and debris without losing suction. This not only allows users to see when the vacuum is full but also promotes a clean and hygienic approach to vacuuming, as users can easily empty the bin and avoid the mess associated with traditional vacuum bags.

The DC01 is equipped with an advanced filtration system that captures allergens and microscopic particles, making it an ideal choice for allergy sufferers. This system includes a washable foam filter and a post-motor filter, ensuring that the air released back into the environment is cleaner than the air taken in. The combination of cyclonic separation and effective filtration distinguishes the DC01 in a competitive market.

Another key characteristic of the Dyson DC01 is its versatility. It comes with various attachments, including a combination tool for various surfaces, a crevice tool for reaching tight spaces, and a dusting brush. This comprehensive set of tools allows users to maintain different types of floor coverings as well as upholstery and curtains with ease.

The DC01 also boasts a robust build quality, ensuring longevity and reliability. While it has evolved over the years, the basic principles behind the DC01 continue to inform Dyson's design ethos. The vacuum cleaner is lightweight and easy to maneuver, which adds to its appeal for everyday users.

Overall, the Dyson DC01 exemplifies how innovative technology can transform a common household appliance into something extraordinary. With its combination of powerful suction, advanced filtration, and iconic design, it remains a beloved model in the history of vacuum cleaners, paving the way for future advancements in home cleaning technology.