Assembly
NOTE: Dust cup filter must be used when operating the hand vac.
Release
Button
Filters
1. To open the dust cup, push release button and pull dust cup away from cleaner. Verify that the dust cup filters are inside, then reattach the dust cup to the hand vac.
Dust Cup
2. To attach the cleaning brush or crevice brush to the hand vac, push brush into the suction hole, as shown.
Carrying Strap
Connection
3.To use the flexible hoses, push the end of the hose into the suction hole, then attach the desired brush to the other end of the flexible hose, as shown. Only one end of the hose fits into the hand vac.
To use the carrying strap attach the strap to the connection on the hand vac.
4.The long flexible hose and wands allow you to use the floor nozzle. Push the long flexible hose into the dust cup opening. The floor nozzle will fit directly onto the end of the long flexible hose or you can add any combination of
the three wands for a comfortable working position. Only one end of the long flexible hose goes into the dust cup opening.
6