Eureka 8800-8849 Series How to Use Accessories, Telescopic Self-Cleaning Duster, Dusting Brush

Page 5

How to Use Accessories

! Vacuum Cleaner handle must be in upright position

Telescopic Self-Cleaning Duster

Furniture, blinds, pictures and high-reach areas. Can be used in short or extended positions.

1) Activate static charge: Push power switch ( I ) on and turn activation knob for 10 seconds to clean or charge duster.

2) Turn vacuum off and remove duster from cleaning chamber.

3) Short position: Dust low surfaces.

4) Extended position: Turn twist tabs to extend. Push firmly to collapse and turn to lock.

!Be sure to raise height adjustment setting before using attachments.

Combination Crevice Tool

and Extension Wand

Baseboards, corners & between cushions

1) Grasp crevice tool near ridges and pull apart.

2) Turn ridge end to center.

3) Push crevice tool into wand and place on end of hose.

Dusting Brush

Furniture, drapes, blinds, bookshelves, lampshades and vents.

1) Remove hose from hose retainer from back of vacuum.

2)Place dusting brush on end of hose, wand or crevice tool.

ENGLISH

Power Paw® and Stair Hose

 

 

Furniture and stairs. Some vacuum models have an additional stair hose – Part number 70947-5.

 

Make sure vacuum is below you,

 

 

pushed against the bottom step.

 

 

1) If model has additional stair hose,

 

 

attach to end of hose.

 

 

2) Attach Power Paw to the end

 

 

of wand or hose.

 

 

Vacuum must be turned off before

 

 

removing debris from Power Paw.

 

 

For additional assistance, call Eureka

 

 

Customer Service HELPLINE.

 

 

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com

3

Image 5
Contents OWNER’S Guide BeforeYou Start Your VacuumCleaner Where to Find Important Vacuum Cleaner InformationMotor Important SafeguardsFilter Maintenance Schedule How to Identify Parts of Vacuum CleanerFoam Filter PMF-1 Filter FrameTelescopic Self-Cleaning Duster How to Use AccessoriesPower Paw and Stair Hose Combination Crevice Tool Extension WandMake sure vacuum is turned off and power cord is unplugged How to Maintain YourVacuum CleanerChange Light Bulb Part number Motor can become hot with normal useAir Path Blockage Fig How to Clear a BlockageProblem Cause Solution