Clarke SPS-28 manual HOW to Operate the Machine

Page 8

HOW TO OPERATE THE MACHINE

NOTE: Do not attempt to operate the CLARKE Model SPS-28 before reading the instructions in this manual.

WARNING: To prevent injury , always wear protec- tive clothing. Do not wear loose cloth- ing.

WARNING: Do not check the engine oil level when the engine is running. Failure to check the oil level before you use the machine can destroy the engine. Always make sure the machine has the correct amount of oil.

Follow the procedures below when operating the machine:

1.Turn the timer-switch to the "OFF" position.

2.Insert the DC charger plug into the unkeyed battery bank plug.

3.Plug the AC cord into a single phase grounded outlet with voltage and frequency corresponding to the charger name- plate. Assure that the circuit has adequate capacity to handle the nameplate current.

4.Turn the timer-switch clockwise directly to the "ON" posi- tion. The AC pilot light and the DC ammeter show that the charger is on and charging.ammeter show that the charger is on and charging. The charger will run for a total period of sixteen (16) hours; the timer-switch knob will rotate clockwise and automatically turn the charger off when the pointer reaches the "OFF" position.

5.The charger may remain connected to the batteries for extended periods without harming the charger or discharg- ing the batteries.

How to Operate the Sweeper

1.Adjust the main broom to correct sweeping* by rotating broom adjusting lever - clockwise to raise, counterclock- wise to lower. (See Fig. 2)

2.Lower the main broom to "SWEEP" setting by placing the adjusting lever in the horizontal latched position.

Fig. 2

Page 8

Clarke® Model SPS-28 Space Sweeper Operator's Manual

Image 8
Contents Operators Manual Read this BookTable of Contents Operator Safety Instructions Avertissement Advertencia Position Operator Safety Instructions for Battery Powered MachineTo avoid injury. When you stop the ma Introduction How to Prepare The Machine for Operation Model 28G Gasoline PoweredHOW to Charge the Batteries HOW to Operate the Machine HOW to Operate the Machine How to Empty Debris Hopper Cleaning Panel FilterHow to Clean the Cloth Filter Cartridge Panel FilterSpace Sweeper Service and Maintenance How To Check the EngineHow to Clean the Engine Air Filter LubricationMain Broom Adjustment Side Broom Belt AdjustmentEngine Speed Adjustment Model 28G Installation of new Main BrushInstallation of New Main Brush Capacitor Test Diode Test9293 10111213 Ref # Description Qty 2359 1110 9490 13951416 2711 5657 8321 126 8583 Ref # Description Qty Clarke Model SPS-28 Ref # Part No. Description Clarke Model SPS-28 Battery Powered Model Drawing 1/99 Tubing, Battery Enclosure to Circuit Breaker Clarke Model SPS-28 Space Sweeper Operators Manual Clarke Model SPS-28 Wiring Diagram 1/99 Clarke Model SPS-28 Space Sweeper Operators Manual Clarke Product Support Branches Clarke Limited U.S. Warranty

SPS-28 specifications

The Clarke SPS-28 is a cutting-edge marine navigation system designed to enhance vessel safety, efficiency, and performance. This innovative system integrates advanced technologies to provide real-time data and analytics, improving situational awareness for operators in various maritime environments.

One of the standout features of the Clarke SPS-28 is its robust Global Navigation Satellite System (GNSS) integration. The SPS-28 uses multiple GNSS signals, ensuring high accuracy and reliability, even in challenging conditions. This multi-constellation support allows the system to maintain precise positioning for vessels navigating through busy ports or remote areas alike.

Another key aspect of the SPS-28 is its advanced radar capabilities. The microwave radar technology employed in the system allows for accurate object detection and tracking in all weather conditions. The radar’s long-range capabilities enable users to identify potential obstacles or vessel traffic well in advance, giving operators ample time to make informed navigational decisions.

The user interface of the SPS-28 is designed for simplicity and ease of use. Featuring a high-resolution touchscreen display, the system allows users to quickly access essential data, including navigational charts, AIS (Automatic Identification System) information, and vessel performance metrics. The intuitive graphical interface minimizes the operator’s workload by presenting critical information in a clear and concise manner.

Safety is a paramount consideration for the Clarke SPS-28. The system includes built-in safety features such as collision avoidance alerts and anchor watch functionalities. These features provide real-time alerts to prevent potential accidents, ensuring that vessels can navigate safely in congested waters or during challenging weather conditions.

In addition to navigation, the SPS-28 is equipped with several communication technologies, including VHF radio and satellite capabilities. This connectivity ensures that vessels remain in contact with other ships and shore-based operations, facilitating smooth coordination and response during emergencies.

Furthermore, the SPS-28 is designed with adaptability in mind, able to integrate with other onboard systems such as autopilot, engine management, and environmental monitoring tools. This integration enables a comprehensive approach to vessel management, streamlining operations and maximizing efficiency.

Overall, the Clarke SPS-28 represents a significant advancement in marine navigation technology, offering a suite of features that enhance safety, performance, and operational efficiency for modern seafaring vessels. With its state-of-the-art technologies and user-friendly design, it is an invaluable asset for mariners navigating the complexities of today’s maritime challenges.