Hoover SteamVacuum Brush speed selector, Brush indicator, Tanks Clean solution tank, Upper tank

2-5

The deep cleaner may also be lifted by placing a hand under the upper clean solution tank handle as shown.

2-6

Brush speed selector

Your ‘SteamVac’ deep cleaner has three agitator brush settings.

Hl - for normal cleaning of carpet and bare floors

LO - for gentle cleaning of carpets and bare floors

OFF - for cleaning carpets and bare floors when brushing is not desired. (Such as when picking up liquid spills. See page 10.)

Slide selector button to the desired set- ting before cleaning.

2-7

F

G

Brush indicator

The brush indicator will spin (F) when the deep cleaner is turned ON and the brushes are rotating.

If the indicator does not spin and the pattern is visible (G) when the deep cleaner is turned ON, the brushes are not rotating.

There are three reasons why the brushes may not be rotating:

1.Brush speed selector set on OFF (see previous section).

2.Solution tube connected (page 12).

3.Brush indicator screen dirty.

2-82-9

I

H

2-10

To clean screen (H), turn deep cleaner off and disconnect from electrical outlet.

Remove clear cover and wipe off screen with a damp cloth. Snap cover back into position.

The tanks

Clean solution tank

(upper tank)

The clean solution tank holds the clean- ing solution that is to be dispersed onto the surface to be cleaned.

How to fill

Disconnect deep cleaner from electrical outlet.

Place deep cleaner handle in the upright, locked position.

To remove tank, press down on handle

(I)and pull forward. Carry tank to a sink.

Rotate tank cap counterclockwise and lift up to remove cap.

7