Hoover U5458910 Clearing blockages, Full One Year Warranty, Domestic Use, Checking airflow path

Page 12

Hoover Cleaning Performance

This Hoover Cleaning Performance System is for comparing the relative progressive performance of Hoover uprights only and not for compari- son with any other brands. The majority of this rating is based upon ASTM International Carpet Cleaning Effectiveness Testing (ASTM Test F608). Other performance factors include Hose Power (ASTM Test

Clearing blockages

Disconnect cleaner from electrical outlet.

Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for blockages continuing with each step until the blockage is found:

1.Check fullness of filter bag; change if needed.

Full One Year

Warranty

(Domestic Use)

Your HOOVER® appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in correct operating con-

F558), Surface Litter Cleaning, Hard

Floor Cleaning, Edge Cleaning,

Cleaning Width and Air Filtration.

4.If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check- list below.

4-1

A

B

C

A

C B

dition during the warranted period. This warranty applies when the appliance is purchased in the United States including its territories and possessions, or in Canada or from a U. S. Military Exchange. Appliances purchased else- where are covered by a limited one year warranty which covers the cost of parts only. This warranty does not apply if the appliance is used in a commercial or rental application.

Problem: Cleaner won’t run

Possible Cause

Possible Solution

Not firmly plugged in

Plug unit in firmly

No voltage in wall plug

Check fuse or breaker

Blown fuse or tripped breaker

Replace fuse or reset breaker

Thermal protector activated

Allow cleaner to cool for 30 minutes (this will reset the thermal protector)

Problem: Cleaner/ tools won’t pick up

Possible Cause

Possible Solution

Broken or worn belt

Replace belt

Agitator brush roll worn

Replace brush roll

Filter bag full

Change filter bag

Incorrect carpet height setting

Move nozzle control knob to lower setting

Blockage in air flow passage

Clear blockage

Problem: Cleaner hard to push

Possible Cause

Possible Solution

Incorrect carpet height setting

Move carpet height control to a higher setting

Problem: Smoky/burning smell

detected

Possible Cause

Possible Solution

Belt broken or stretched

Replace agitator brush roll belt as described in Figs. 3-10 through 3-15 in the Maintenance section.

12

Checking airflow path

2.Plug cleaner in and turn ON. Check for suction at end of hose (A).

a.If there is suction, continue with step 3.

b.If there is no suction, check for blockage in hose and dirt tube as follows:

1)Disconnect hose from dirt duct

(C) by reversing procedure for “Attach hose” on p. 4, Figs. 1-11 and 1-12.

2)Clear out hose.

3)Look into (C) and remove blockage.

3.Check connection at hose tube (B); remove any blockage.

4-2

D

Checking under bottom plate

4.Turn cleaner OFF and unplug.

5.Remove bottom plate, belt and agitator (see “The belt” section).

Look into opening (D) for blockages and remove.

6.Remove agitator shield (see Fig. 3-13) and remove any loose debris which may have accumulated under it.

This warranty only applies when the product is in use in the country or territo- ry in which it is purchased.

Warranty service can only be obtained by presenting the appliance to one of the following authorized warranty service outlets. Proof of purchase will be required before service is rendered.

1.Hoover Factory Service Centers.

2.Hoover Authorized Warranty Service Dealers (Depots).

For an automated referral of autho- rized service outlets in the U.S.A., phone 1-800-944-9200 OR

visit The Hoover Company on-line at www.hoover.com

This warranty does not cover pick up, delivery, or house calls; however, if you mail your appliance to a Hoover Factory Service Center for warranty service, transportation will be paid one way.

While this warranty gives you specific legal rights, you may also have other rights which vary from state to state.

If further assistance is needed, or if there are questions concerning this war- ranty or the availability of warranty ser- vice outlets, write or phone the Consumer Response Center, The Hoover Company, 101 East Maple St., North Canton, Ohio 44720.

Phone 1-330-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, 1-800-263-6376.

Image 12
Contents This product was designed for easy assembly See Congratulations on your purchaseFill in and retain English pp.1-12Assembling cleanerNot Carton contentsSwitch a above bag door should be in OFF position Make sure tab is inserted fully into slotCleaner description ON-OFF switchPolarized plug Cord clipTransporting cleaner Carrying cleanerCarpet height Adjustment Handle positionsCleaning lightweight flexible rugs Edge cleaningStair cleaning How to attach tool coverCheck bag indicator Extra reach hoseFilter bag Secondary and final filters Headlight replacement Belt replacementHow to replace Service Edge groomersAgitator brush roll LubricationFull One Year Warranty Clearing blockagesDomestic Use Checking airflow path

U5458910 specifications

The Hoover U5458910, a popular vacuum cleaner model, has gained significant attention for its blend of efficient performance and user-friendly features. Designed for both carpet and hard floor cleaning, this model showcases a variety of technologies aimed at enhancing cleaning efficiency and convenience.

One of the standout features of the Hoover U5458910 is its powerful motor, providing strong suction capabilities that ensure dirt, dust, and debris are effectively removed from various surfaces. The vacuum utilizes a multi-cyclonic filtration system that helps separate larger particles from fine dust, ensuring that the filter remains clean for longer periods. This technology also aids in improving overall suction power, allowing for more thorough cleaning without the need for constant filter replacement.

The U5458910 comes equipped with a HEPA filter, which captures 99.97% of dust and allergens as small as 0.3 microns. This feature is particularly beneficial for allergy sufferers, as it helps maintain a healthier home environment by preventing allergens from being released back into the air. Furthermore, the filter is washable, which adds to the long-term cost-efficiency of owning this vacuum.

In terms of maneuverability, the Hoover U5458910 weighs in at a reasonable weight, making it easy to lift and carry around the home. Its ergonomic handle ensures a comfortable grip during use, reducing strain on the hands and wrists. The vacuum also features a 12-foot hose, allowing users to reach higher surfaces like drapes and ceiling corners without difficulty.

Another noteworthy characteristic is the vacuum's multiple floor settings. This feature allows users to adjust the brush roll height, making it suitable for various types of flooring, from plush carpets to delicate wood floors. Additionally, the U5458910 includes a variety of onboard tools, such as a crevice tool and dusting brush, which enhance its versatility for various cleaning tasks.

The Hoover U5458910 is designed with a clear dirt cup, making it easy to see when it’s time to empty. This feature, combined with a simple release mechanism, ensures that emptying the vacuum is a quick and mess-free process.

Overall, the Hoover U5458910 stands out for its combination of advanced technologies, user-friendly design, and powerful performance, making it a reliable choice for households looking for thorough and efficient cleaning solutions.