3.To install the new bag, place. the notches on the bag collar (at the bag,edge) into the grooves in- side the lower front of cleaner.
4.Pull collar forward until latch snaps onto collar. Open folds of bag. Replace cover.
Secondary filter
To clean secondary filter
Disconnect cleaner from elec- trical outlet.
The secondary filter protects the motor from dirt particles. If the filter becomes dirty,
The secondary filter is located in- side the cleaner, behind the throw away bag. To remove fil- ter, first remove cover of cleaner, then lift out filter. Clean filter by rinsing it in water. When dry, slide filter back into position.
Do not operate cleaner without the secondary filter in place.
1 3