Maintenance, Emptying tanks, Filters | Hoover Wet/Dry Vac specs

3. Maintenance

Emptying tanks

After dry pick-up

Disconnect cleaner from electrical outlet.

Release lid latches and remove cleaner lid from tank.

To avoid back strain, do not lift a full tank. First, scoop out enough debris to make tank easier to lift.

Empty contents into a suitable receptacle.

Rinse inside of tank with clean water and wipe dry.

Note: If not very full, the inner tank may be easier to empty if it is removed from the outer tank.

When emptying the inner tank, do not grab onto filter cage.

3-1

After wet pick-up

Unscrew drain cap (A) from bottom of outer tank. Empty contents into a suitable drain.

As the liquid level decreases, it may be necessary to tip cleaner to allow remaining liquid to drain out.

Rinse inside of tank thoroughly with clean water particularly if spills or other substances other than water have been picked up.

Wipe inside of tank dry.

Filters

Do not operate cleaner without filters in place.

Filters are available at your Hoover Factory Service Center, Authorized Hoover Warranty Dealer (Depot), on the enclosed order form, or by writing to The Hoover Company, North Canton, Ohio, 44720.

To assure that your cleaner operates at peak performance, it is imperative that you use only genuine HOOVER filters distributed by The Hoover Company. HOOVER filters can be identified by these trademarks -

3-2 B

Foam filter

Disconnect cleaner from electrical outlet.

To clean, remove foam filter (B) and rinse with clean water. Let filter air dry.

To replace, slide filter completely down over openings on inner tank filter cage (C).

If the cleaner is used as a single tank unit for wet pick-up, it is best to use a HOOVER® foam filter sleeve, available at additional cost, instead of the cartridge filter.

3-3

Reusable cartridge filter

Disconnect cleaner from electrical outlet.

After dry pick-up, remove filter (D) and gently tap it against inside of cleaner tank or brush off debris with a soft brush.

After wet pick-up, allow filter to dry and gently brush with a soft brush.

Check filter thoroughly and replace it if there are any tears or holes in it.

If extremely dirty, the cartridge filter can also be rinsed occasionally with tap water.

NOTE: Vigorous scrubbing or frequent rinsing may shorten the life of the cartridge filter.

To replace, slide cartridge filter over filter cage (E) until it will not go on any further.

Lubrication

The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage.

Do not add lubricant to motor bearings.

Wet/Dry Vac specifications

The Hoover Wet/Dry Vac is a versatile cleaning tool designed to tackle a wide range of messes in both residential and commercial settings. Known for its durability and efficiency, this vacuum cleaner stands out due to its innovative features and robust design.

One of the key features of the Hoover Wet/Dry Vac is its powerful motor that offers impressive suction capabilities. It effectively picks up both wet and dry debris, making it ideal for spills, construction debris, and everyday dirt in your home or workspace. The ability to handle liquids sets it apart from standard vacuums, allowing users to clean up quickly and efficiently without the need for multiple devices.

A notable technological advancement in the Hoover Wet/Dry Vac is its multi-stage filtration system. This system is designed to capture fine dust and particles, ensuring that the air expelled from the vacuum is cleaner than the air that was drawn in. The washable filter not only contributes to better air quality but is also a cost-effective solution for users who wish to reduce their consumption of disposable filters.

Additionally, the Hoover Wet/Dry Vac comes equipped with a variety of accessories that enhance its functionality. These may include extension wands, floor nozzles, and specialized brushes for different cleaning tasks. This array of attachments allows users to customize their cleaning experience, whether they are vacuuming carpets, cleaning hard floors, or tackling tight spaces.

Another characteristic of the Hoover Wet/Dry Vac is its large-capacity tank. With ample space for both liquid and dry debris, users can clean larger areas without frequently emptying the tank. This feature is particularly advantageous for professionals who need to maintain efficiency on the job.

The unit is also designed for mobility and ease of use. Many models include sturdy wheels and ergonomic handles, making it easy to transport from one location to another. Some versions feature a compact design for convenient storage, making them perfect for homes with limited space.

Finally, the Hoover Wet/Dry Vac is backed by a reputation for reliability and performance, making it a go-to choice for those seeking an effective cleaning solution. With its combination of power, versatility, and user-friendly design, it remains a top contender in the market for wet/dry vacuums, catering to both everyday households and demanding professional environments.