Hoover Wind Tunnel Canister Cleaner with Powered Nozzle Filters Secondary and micro, How to clean

Page 8

3 - 2

3 - 3

3 - 4

B

A

 

 

 

Carefully pull out used bag.

Form new bag into a box-like shape.

Push rear edge of bag into bag cavity

 

Slide bag collar firmly into holder.

below seal (A).

 

 

Clear bag opening (B) by pushing the

 

 

pierced paper through opening toward

 

 

bag interior.

 

 

Close bag lid.

3 - 5

How to attach bag lid

The bag lid and hinges are designed with a “break- away” feature. If the lid is pushed open too far, it will come off. It can be easily re-attached by aligning the hinges with the appropriate slots in the cleaner, as shown.

3 - 6

Filters-

secondary and micro

How to clean

Disconnect cleaner from electrical outlet.

The secondary filter, located behind the grill in the bag compartment, pro- tects the motor from dirt particles. If fil- ter becomes dirty, pull off grill and lift out filter. Wash filter in warm water or replace it with a new one. A dry filter must be put back into cleaner.

Do not operate cleaner without sec- ondary filter in place.

3 - 7

The micro filter aids in the filtration process to return clean air to the room. To remove this filter, open tool lid, remove dusting brush and pull up red fil- ter cassette.

3 - 8

If filter is dirty, open grid on cassette and remove filter. Wash filter in warm water or replace it with a new one. A dry filter must be put back into cleaner.

8

Belt replacement

The belt in your power nozzle drives the a g i t a t o r. It has been designed specifi- cally for use in this cleaner and is impor- tant for effective operation.

What to buy

T h e re are other belts manufactured that a re similar in shape and size, but are not designed for the HOOVER power nozzle. Such belts do not operate the agitator

c o rrectly and may create stress which could damage your power nozzle. Use only a genuine HOOVER Belt p a rt n o .

4 0 2 0 1 1 8 0 when a belt replacement is n e c e s s a ry.

When to replace

The belt should be checked from time to time to be sure it is in good condition. To check, remove the hood (see following section). Replace the belt if it is stre t c h e d , cut, or broken.

Image 8
Contents Hoover P o rtant Safeguard s Connect hose, wands and nozzle Assembling cleanerCarton contents 424 How to useCleaner description ON-OFF switches Check bag indicatorDeluxe power nozzle Polarized plugCleaning tools Edge cleaningSuction regulator Variable speed controlMaintenance How to store cleanerHow to clean stairs Filter bagBelt replacement How to attach bag lidHow to clean Filters Secondary and micro14 E Agitator brush roll replacement Edge groomer replacementService Headlight re p l a c e- m e n tClearing blockages If you have a problemFull One Year Warranty Domestic Use Hoover COMPANY, North CANTON, Ohio

Wind Tunnel Canister Cleaner with Powered Nozzle specifications

The Hoover Wind Tunnel Canister Cleaner with Powered Nozzle is a standout appliance designed to enhance your cleaning experience. Combining innovative technologies with practical features, this vacuum cleaner is tailored to address various cleaning needs in modern households.

One of the most prominent features of the Hoover Wind Tunnel Canister Cleaner is its Wind Tunnel technology. This specialized suction design creates powerful channels of air that effectively lift and remove dirt and debris from carpets and hard surfaces alike. With a focused airflow, the Wind Tunnel technology ensures a thorough clean while minimizing the risk of scatter, making it especially efficient for homes with pets or heavy foot traffic.

The powered nozzle is another game-changer in this canister cleaner's design. Equipped with spinning brushes, it works wonders on embedded dirt and pet hair, ensuring that every nook and cranny is attended to. This feature is particularly useful for cleaning carpets, as the motorized brush agitates the fibers to release trapped particles, providing a deep clean that traditional vacuums may miss.

The Hoover Wind Tunnel Canister Cleaner also boasts a Multi-Cyclonic filtration system. This technology helps to separate dirt and debris from the air, maintaining suction power and ensuring that the vacuum does not lose its effectiveness over time. It also contributes to healthier air quality in your home, as the filtration system captures allergens and dust, preventing them from being redeposited into the environment.

Designed for ease of use, this canister cleaner features a lightweight and compact design that allows for smooth maneuverability around furniture and tight spaces. The integrated carrying handle makes transporting the vacuum from one room to another a breeze. Additionally, the 360-degree hose swivel enhances flexibility, enabling users to reach difficult areas without hassle.

The Hoover Wind Tunnel Canister Cleaner comes with a variety of attachments to accommodate different cleaning tasks. These include a crevice tool for tight corners, an upholstery tool for soft furnishings, and a dusting brush for delicate surfaces. The versatility of these attachments makes the vacuum ideal for comprehensive cleaning in any setting.

With a combination of powerful suction, advanced filtration, and ergonomic design, the Hoover Wind Tunnel Canister Cleaner with Powered Nozzle stands out as an essential appliance for those seeking efficient and effective cleaning solutions.