Hoover U6049 manual Cleaning tools, HOW to USE, Connect hose, Adjust suction, Attach tools

Cleaning tools

1.Vinyl hose Hose has vinyl jacket for long, trouble-free life. The light flexible hose has a vinyl tab, so it can be hung on the cleaner. A suction regulator is located on the hose grip.

2.Extension wand Use to give extra length when cleaning stairs or above the floor, hard to reach areas.

3.Upholstery brush For upholstered furniture, draperies, tapestries, mattresses, clothing, auto- mobile interiors and carpeted stairs.

4.Crevice tool For upholstered furniture, edges of wall-to-wall carpeting that are inaccessible with cleaner, radiators, dresser drawers.

HOW TO USE

Handle must be in the Storage Position when using tools.

1. Connect hose

Set the indicator on the dial at MAX position under CARPET SUCTION. Insert hose connector on hose in opening below dial, and turn the hose connector in a clockwise direction until it locks into place.

Set the suction regulator on the cleaner to

MAXIMUM TOOL SUCTION.

2. Adjust suction

A second suction regulator* is located on the hose grip and it adjusts the amount of suction when using the attachments.

Set.the suction regulator to MINIMUM, MEDIUM, or MAXIMUM suction by rotating the plastic ring until the raised plastic indicator on the dial is directly under the desired setting.

*Some models only. If your cleaning tool set does not have a suction regulator on the hose grip, ad- just the suction by setting the regulator on the cleaner.

3. Attach tools

a. To hose grip Attach a tool or the wand (for length) directly to the hose grip by rotating the plastic latch ring on the hose grip to accept the button projection on the end of the tool or wand. Turn the latch ring clockwise to lock in place.

To remove, reverse the above procedure.

6