TROUBLESHOOTING AND CUSTOMER INFORMATION
Troubleshooting
The vacuum cleaner does not start
1Check that the cable is connected to the mains.
2Check that the plug and the cable are not damaged.
3Check for a blown fuse.
The vacuum cleaner stops
1Check whether the dustbag is full. If so, replace it with a new one.
2Is the nozzle, tube or hose blocked?
3Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor by an authorised Electrolux service engineer.
Damage to the motor caused by the penetration of water is not covered by the warranty.
Customer Information
Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tam- pering with the appliance. This product is designed with the environment in mind. All plastic parts are marked for recy- cling purposes. For futher details see our website: www.electrolux.com
For repairs or accessories, contact the Electrolux Group Floorcare Helpline on 08706 055 055.
If you have any comments on the cleaner or the Instructions for Use booklet please
7