Before you start …check the voltage

Z45xx_ifu_2.qxp 2005.04.27. 11:00 Page 9

ELECTRICAL SUPPLY INSTRUCTIONS

Before connecting the cleaner to an electrical supply ensure that voltage marked on the data plate (on the underside of cleaner) is correct for your electrical supply. If is not, do not use the cleaner but refer back to your dealer.

Connecting to your electrical supply

Permanently connected to the cleaner is a mains supply (2-core) cable fit- ted with a non-rewirable plug incorporating a 13A fuse. In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be replaced by a 13A ASTA approved BS1362 fuse and the fuse cover mustbe replaced before the plus is used again. In the event ofloss of the fuse cover, replacements can be obtained from your Electrolux dealer or Electricity Board and must be of the same colour as indicated by the coloured insert on the base plug.

If difficulty is experienced in obtaining a replacement, contact your nearest Electrolux Service Centre. (Please see the separate Electrolux Service Organisation leaflet).

In no circumstances must be plug be used without a correct fuse cover fitted

If the plug that is fitted to your appliance is not suitable for your socket out- let, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cutoff plug should then be disposed of to prevent haz- ard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.

The wires in the mains cable of this appliance are coloured in accordance with the following code:

Blue: Neutral.

Brown: Live.

As the colours of the wires in the mains cable of this appliance may not cor- respond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or green-and-yel- low. [This cleaner is double insulated and no earth-connection is necessary.]

It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, have it done by a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of guarantee.

As a general guide to fitting any plug

•Ensure the lengths of wire inside the plug are prepared correctly.

•Connection should be firmly made after all conductor stands are entered into the terminal posts.

•When preparing the cable ends take care not to damage the outer seal, or insulation surrounding the inner conductors.

•Tighten all screws.

•Replace the top cover of the plug and secure.

Z4520, Z4590 specifications

Electrolux has long been a leader in the home appliance sector, known for producing innovative and high-quality products that enhance everyday living. Two of their notable vacuum cleaner models, the Electrolux Z4590 and Z4520, exemplify this commitment to excellence in design, functionality, and user experience.

The Electrolux Z4590 is packed with features that make cleaning an efficient and pleasant experience. One of its main attributes is its powerful suction capability, driven by a robust motor that ensures the machine picks up dirt and debris from a variety of surfaces, including carpets and hard floors. The Z4590 also features advanced filtration technology, which captures allergens and fine particles, making it an excellent choice for households with allergy sufferers.

Ergonomics is another strong point for the Z4590. It is designed with a user-friendly handle and lightweight construction, making it easy to maneuver and carry around the home. The vacuum also comes with multiple attachments, including a crevice tool and dusting brush, enabling users to reach tight spaces and clean delicate surfaces with ease.

On the other hand, the Electrolux Z4520 offers its own unique set of features. This model is designed for versatility, equipped with a 2-in-1 functionality that allows for both upright and canister vacuuming. This two-in-one design provides flexibility for users to switch between different cleaning modes seamlessly, making it suitable for various cleaning tasks.

The Z4520 also incorporates an easy-to-empty dust container, which makes maintenance simple and hassle-free. Its advanced brush roll technology ensures that hair and large debris are effectively picked up, reducing the likelihood of tangles and clogs. Additionally, the Z4520 has adjustable suction settings, allowing users to customize the vacuum's power according to the floor type, whether it’s thick carpeting or hardwood.

Both models stand out with their eco-efficient performances, aligning with Electrolux’s commitment to sustainability. They are designed not only to perform efficiently but also to consume less energy, contributing to a lower environmental impact.

In summary, the Electrolux Z4590 and Z4520 are exemplary vacuum cleaners that showcase cutting-edge technology, ergonomic designs, and efficient cleaning capabilities. Whether you choose the powerful suction and ergonomic design of the Z4590 or the versatility and user-friendly features of the Z4520, you can be assured of a superior cleaning experience that meets modern home needs.