How to Identify Parts of Vacuum Cleaner

How to Identify Parts of Vacuum Cleaner

Handle

Hose

Cord Retainer

Self-Cleaning Duster

Turbo Nozzle

Hose Hook

Power Switch

Dusting Brush

(some models)

Filter and Screen

Quick Release Cord Wrap

(located inside dust cup)

Carrying Handle

Dust Cup

Power Cord

Duster Activation Lever

Nested Crevice Tool

& Extension Wand

Lower Cord Wrap

Headlight

HEPA Filter Compartment

Hose Retainer

Height Adjustment Knob

Handle Release

Brush Roll Cover

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.

DUST CUP – Empty after each use

Press lever to release bottom lid.	Close bottom lid
Debris will empty.	until it clicks.

FILTER DCF21 – Clean or replace regularly, to maintain suction

Filter

DCF21

Empty debris. Pull back	Pull out filter.	Rinse filter and dust cup;
latch to lift off lid.		dry thoroughly.

Screen

Rinse dust cup;	Reinstall filter and	Align lid at front; press down
dry thoroughly.	screen inside dust cup.	until lid snaps into place.

HEPA FILTER HF7 – Replace within 6 months

HEPA Filter

HF7

Lay flat, grasp cover and pull off.

Lift out filter and replace.

BRUSH ROLL – Clean monthly

Brush Roll	EXT-U BELT – Replace worn, cut or out of shape belt
	EXT-U Belt

2 Eureka Customer Service HELPLINE 1-800-282-2886