General Information, Service Information

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Afin de réduire le risque de choc électrique , cet appareil est muni d’une fiche polarisée (une des lames est plus large). Cette fiche ne peut être insérée dans une prise polarisée que d’une seule façon. Si la fiche ne peut être insérée dans la prise, retourner la fiche. Si la fiche ne peut toujours pas être insérée dans la prise, faire installer une prise adéquate par un électricien qualifié. Ne pas modifier la fiche.

GENERAL INFORMATION

The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or sharp objects with the cleaner to avoid bag breakage, hose clogging, or possible motor damage.

Service Information

The instructions in this booklet serve as a guide to routine maintenance. For additional service information telephone our toll free number for the nearest Eureka Authorized Warranty Station. You should know the model, type and serial numbers when you

call:USA: 1-800-282-2886 Mexico: 5670-6169

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 N. Main Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Warranty for complete service information.

DO NOT OIL the motor at any time. The bearings are permanently lubricated and sealed.

Rating Plate

The model, type, and serial numbers are indicated on the rating plate located on the underneath side of the cleaner. For prompt and complete service information, always refer to these numbers when inquiring about service.

MODEL	TYPE	SERIAL NO.
VOLTS	AMPS.	HERTZ

SERVICE INFORMATION: 1-800-282-2886

THE EUREKA COMPANY

BLOOMINGTON, ILLINOIS 61701

Model & Type______________________ Serial No. _________________________

Thermal Cut Off

This cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly turns off, follow this procedure:

1.Push the on/off button to the off position.

2.Unplug cleaner.

3.Check for source of overheating problem (i.e. full bag, clogged hose or clogged filter).

4.If a full bag, clogged hose or clogged filter is found, replace the bag, unclog the hose or replace the filters.

5.Wait at least 30 minutes before attemptimg to reuse the cleaner.

6.After 30 minute cool down period, plug the cleaner in and push on/off button. The cleaner should turn on.

7.If the cleaner still does not operate, take it to any Eureka Authorized Service Center for repair.

3530 specifications

Eureka 3530 is a cutting-edge multi-purpose machine designed to meet the diverse needs of various industries. Known for its efficiency, durability, and versatility, it has become a preferred choice among professionals seeking a reliable solution to their operational challenges.

At the heart of the Eureka 3530 is its robust engine, which offers superior performance and energy efficiency. This engine is coupled with advanced fuel management systems, ensuring optimal power output while minimizing fuel consumption. The unit's design focuses on reducing emissions, making it an eco-friendly choice for environmentally conscious businesses.

The 3530 features a state-of-the-art hydraulic system, allowing for smooth and precise operation. This system enhances the machine's ability to handle heavy loads with ease, ensuring consistent performance even in the most demanding environments. The hydraulic components have been engineered for longevity and low maintenance, thereby reducing total operating costs over the machine's lifespan.

Another standout feature of the Eureka 3530 is its user-friendly interface. Operators will appreciate the intuitive controls, which make it easy to navigate the various functionalities of the machine. The digital display provides real-time data on performance metrics, helping operators make informed decisions that enhance productivity.

In terms of versatility, the Eureka 3530 is compatible with a wide range of attachments and accessories. This capability allows users to customize the machinery according to specific tasks, whether it is digging, lifting, or towing. The modular design of the machine ensures that switching tools is quick and hassle-free, further enhancing its multifunctional capabilities.

Safety is also a top priority with the Eureka 3530. It incorporates advanced safety features, including stability control systems and emergency shut-off mechanisms, ensuring operator protection in hazardous conditions. The machine's compact design also facilitates maneuverability in tight spaces while maintaining a stable working platform.

In summary, the Eureka 3530 represents a significant advancement in multi-purpose machinery. Its powerful engine, efficient hydraulic system, user-friendly controls, and compatibility with various attachments make it a versatile and reliable choice for professionals in multiple sectors. Coupled with its commitment to safety and sustainability, the Eureka 3530 is an excellent investment for businesses looking to enhance their operational efficiency and performance.