Eureka 4680, 4650 warranty HOW to USE, Cleaner Height Setting, Changing the cleaner height setting

Page 7

HOW TO USE

The upright vacuum cleaner design allows use on multiple types of carpeting and on upholstery or bare floors with attachments. When using the attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.

1. Adjust cleaner height setting knob to lowest position for maximum cleaning. Adjust to a higher setting to make pushing easier. For easy adjustments, tilt the cleaner back to move the knob.

2. Plug electrical cord into outlet.

3. Step on handle release. Pull handle back to a comfortable position.

4. Push On/Off power switch.

Store or

Use Attachments

Use

Clean

Under

Handle

3 Release

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair,

 

fingers, and all other parts of body

 

away from any moving part (such as

 

the revolving brush). Turn off the

 

switch and unplug the cleaner before

THERMAL CUT OFF

changing the cleaner height setting.

2

4 ON/OFF

Handle

3 Release

LOW

 

1

HIGH

The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of carpet. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning.

NOTE: For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.

NOTE: When handle is in upright position, brush roll is lifted off carpet. This is normal. Height adjustment will not change brush roll level until the cleaner’s handle is moved into the operating position.

This cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly turns off, follow this procedure:

1.Push on/off pedal once.

2.Unplug cleaner.

3.Check for source of overheating problem (i.e. full cyclonic dust cup, clogged hose or clogged filter).

4.If a full cyclonic dust cup, clogged hose or clogged filter is found, empty the cyclonic dust cup, unclog the hose or replace the filters.

5.Wait at least 30 minutes before attempting to reuse the cleaner.

6.After 30 minute cool down period, plug the cleaner in and push the switch pedal. The cleaner should turn on.

7.If the cleaner still does not operate, take it to any Eureka Authorized Service Center for repair.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents En Mexico llame al For assembly problems or Questions contact Eureka’sFor replacement of broken Or missing items to be Household TypeImportant Safeguards Conseils DE Sécurité Rating Plate Service InformationGeneral Information USA Mexico CanadaGroove HOW to AssembleStep a Attach Handle Step B Attach HosePage Changing the cleaner height setting HOW to USECleaner Height Setting Store or Use Attachments Clean Under Handle ReleaseDusting Side Upholstery How To Use AccessoriesShelves. On some models Dusting Brush On some models Upholstery NozzleHow to Check the Dirt Alert Sensors Maintenance of Dirt Alert Feature On some modelsTo check if dirt sensor is working properly To Change Dust Cup Pleated Filter HOW to MaintainReinstalling the Dust Cup HOW to Maintain How To Empty Dust CupEmptying the Dust Cup Motor Shaft Belt Brush Roll HOW to Maintain Brush RollHow To Replace Brush Roll Belt Brush Roll BeltButton HOW to Maintain How to Clear Hose ClogsHose Assembly Hose AdapterTo replace Hepa cartridge filters HOW to Maintain Pre-Motor FilterTo Clean Pre-Motor Filter To remove Hepa cartridge filtersFilter Exhaust Filter Door Use 15 watt replacement light bulb, part NumberMicron and Hepa Exhaust Filters To Replace Micron or Hepa Exhaust FilterStair Cleaning Hose Only on Certain Models HOW to Assemble and USEProblem Solving Cause Solution USA Mexico Canada Eureka Limited WarrantyBy FAX Qty. Price USD TotalBy Phone 800 438-7352Questions? Do Not Return To Store Call

4650, 4680 specifications

Eureka 4650 and 4680 are next-generation commercial vacuum cleaners designed for efficiency and performance in various cleaning environments. These models are tailored to meet the needs of both residential and professional users, ensuring that every cleaning task is handled with ease and effectiveness.

One of the standout features of the Eureka 4650 and 4680 is their powerful suction capabilities. Both models are equipped with high-efficiency motors that deliver strong suction power, allowing them to pick up dirt, dust, and debris from an array of surfaces, including carpets, hardwood floors, and upholstery. The adjustable suction settings also make it simple to transition between different surfaces, providing versatility for different cleaning challenges.

The design of these vacuums is user-friendly, with lightweight construction that makes them easy to maneuver. The Eureka 4650 and 4680 come with ergonomic handles and a range of attachments that facilitate cleaning hard-to-reach areas such as corners and under furniture. Specialized brushes and nozzles, including crevice tools and dusting brushes, enhance their cleaning capabilities, making them ideal for a comprehensive cleaning experience.

In terms of filtration, both models feature advanced systems to ensure that allergens and fine dust particles are captured effectively. The HEPA filtration technology used in the Eureka 4650 and 4680 guarantees that the air expelled is cleaner than the air taken in. This is especially beneficial for households with allergy sufferers or pets, as it helps to improve indoor air quality.

The Eureka 4650 and 4680 are designed for convenience with a range of user-friendly features. They boast a large capacity dust bag that minimizes the need for frequent replacements, making them economical in the long run. Additionally, the easy-to-empty dust compartments reduce mess during disposal, making the maintenance of these vacuums hassle-free.

Both models incorporate technologies that enhance their durability and performance. They are built with high-quality materials that reduce wear and tear, ensuring a long lifespan for users. Furthermore, the intuitive control layouts make operating these vacuums straightforward, allowing users to focus more on cleaning rather than figuring out complex settings.

In conclusion, the Eureka 4650 and 4680 represent the perfect blend of power, efficiency, and modern design, catering to all cleaning needs. Their robust construction, advanced filtration systems, and versatile cleaning options make them standout choices in the crowded vacuum cleaner market.
Top Page Image Contents