IDENTIFY PARTS
Handle Grip
Cord Retainer | 2 |
Lock Button
Handle Tube
| Handle Release |
| Button |
On/Off Switch |
|
Dust Cup Filter | 3 |
| Telescoping |
5 | Handle |
Dust Cup | Release |
| |
| Cord Hooks |
| 4 |
Lock Button
1
HOW TO ASSEMBLE
Assemble completely before using.
1. Attaching or Removing Floor Nozzle.
Attach fl oor nozzle to the bottom of cleaner by inserting the “T” joint of the fl oor nozzle onto the receiving tube on the main body until it clicks. Push the lock button onto the receiving tube when attaching the fl oor nozzle.
2. Attach Handle Grip.
Align the lock button on the handle tube with the hole in the handle grip. Push the lock button and slide the handle into place
4. Store Cord (using cord hooks).
Pull the electrical cord down around the lower cord hook, then wrap cord around upper and lower cord hooks. Fasten plug to electrical cord to prevent unwinding.
5. Store Unit.
Push telescoping handle release button to lower handle into compact storage position; ensuring the handle is locked.
3. Attach handle.
Push handle into top of cleaner. Insert end with guide tabs into the cleaner. Push handle release button to get the handle tube fully inserted. Handle is properly inserted when you hear a click from the handle release button.
3