Troubleshooting Guide

page 4

Read before calling Service Center.

Trouble

Possible Cause

Possible Remedy

1. Loss or

decrease of

1a.Debris pail is completely full.	1a.Empty debris pail as described on page 3.

vacuum occurs.

1b.Obstruction in the hose. A blockage in the hose can be determined by inserting the hose into any wall inlet and, while power unit is running, check each additional inlet for normal suction by holding the palm of your hand over the open inlet. If normal suction is felt at all other inlets, insert the hose into a second inlet. If the blockage still exists it is located in the hose. However, if the blockage does not occur when the hose is changed, the blockage is probably located in the tubing system leading to the original inlet.

1b.Insert handle end of hose into utility valve at power unit. Turn unit on. This will reverse normal air flow through the hose and dislodge any clogs.

1c.Obstruction in the tubing system inside	1c.Insert hose end into any inlet with power unit
the walls.	running, place the palm of your hand over the
	opposite end of the hose. When you can feel the
	suction increase, hold your hand over the hose
	end for a few seconds and then quickly remove
	your hand. This procedure repeated several
	times should clear the obstruction. If the blockage
	is not cleared, contact your nearest Service Center.

1d.Wall inlet cover not properly sealed.

1d.Check all wall inlet covers to be sure they are closed and sealed tightly.

1e.Exhaust tubing or vent clogged.	1e.Inspect and remove any blockages.

2. Power unit does not start, or

2a.Defective inlet. Check other wall inlets.	2a.Replace defective wall inlet.

shuts off during normal operation with no LED showing red or illuminated.

2b.Thermoprotector has been activated OR there is a tripped circuit breaker on the unit.

2b.Turn unit off for 20 minutes then plug unit back in. If unit does not start, look for the tripped circuit breaker behind the unit, a white button has popped up, push it back to reset it. If circuit breaker trips again, unplug your unit and contact your local Service Center.

2c.Blown fuse or tripped circuit breaker on house electrical panel.

2c.Replace fuse or reset circuit breaker on house electrical panel.

2d.Defective hose.	2d.Replace hose as required.

2e.Microprocessor lockup.	2e.	1)	Push Reset button while unit is engaged OR
NOTE: This apply only to Broan VX6000C		2)	Unplug unit completely for 60 seconds.
& VX12000C.

2f. Low line voltage.	2f.	Contact your local Service Center.

2g.Debris pail full sensing has been activated.	2g.Empty debris pail as described in page 3.

VX12000C specifications

The Broan VX12000C is a versatile and powerful ventilation fan designed for those seeking an efficient solution to indoor air quality challenges. With its sleek design and advanced features, it stands out in the competitive market of ventilation systems.

One of the main features of the VX12000C is its impressive airflow capacity. With a powerful motor that can move up to 120 CFM (Cubic Feet per Minute), it effectively eliminates humidity, smoke, and odors from kitchens and bathrooms. This high-performance capability makes it ideal for areas that require frequent ventilation, ensuring a healthy and comfortable environment.

The VX12000C also incorporates innovative technologies aimed at maximizing efficiency. One of its standout technologies is the SmartSense™ humidity sensor. This sensor detects moisture levels in the air and automatically adjusts the fan speed accordingly. This feature not only conserves energy but also ensures optimal performance at all times, making it suitable for both small and larger spaces.

Another characteristic that sets the Broan VX12000C apart from its competitors is its quiet operation. It operates at a sound level of just 0.3 sones, making it one of the quietest fans in its class. This low noise level is crucial for maintaining a peaceful atmosphere in homes, particularly in bedrooms and living areas where tranquility is essential.

Additionally, installation of the VX12000C is simplified with its versatile design. It is compatible with various ceiling types and can be easily mounted either on the wall or the ceiling. This flexibility in installation allows homeowners to integrate the fan seamlessly into their existing interiors without a major overhaul.

Durability is another hallmark of the Broan VX12000C. Constructed from high-quality materials, it is built to withstand the test of time while maintaining its efficiency. The fan also features a removable fan plate for easy access, making routine cleaning and maintenance a breeze.

Finally, the aesthetically pleasing design of the VX12000C ensures it complements a wide range of décor styles. Its modern and sleek appearance, combined with practical features, makes it an excellent choice for anyone looking to enhance their home's air quality while maintaining a stylish look.

In summary, the Broan VX12000C is an exceptional ventilation fan that combines powerful performance, energy efficiency, and quiet operation, setting a new standard in indoor air quality solutions. Its suite of advanced technologies and user-friendly design make it a top choice for homeowners seeking the best in home ventilation.