Bolens No. 247.770550 operating instructions Front Tab Locking Rod

Page 7

•Raise the nozzle height to the highest setting when using the blower chute. Refer to nozzle height adjustment in the ADJUSTMENT section.

NOTE: The bag/chute switch button attached to the mounting bracket must be fully depressed by the tip of front tab on the blower chute or engine will not start.

		Blower
		Chute
	Front
Front	Tab	Locking
Tab		Rod
Locking
Rod

Figure 6

Image 7

Contents Yard Vacuum Warranty Table of ContentsTraining SafetyPreparation Operation Maintenance and StorageLoose Parts in Carton See Figure Disconnecting Spark PlugAssembly Removing Unit from CartonAttaching the BAG Attaching The Hose AssemblyAttaching the Blower Chute Front Tab Locking Rod Bag Nozzle Height Adjustment Lever Chipper ChuteThrottle Control NozzleTo Stop Engine GAS and OIL FILL-UPTo Start Engine To Empty BAG Using the Nozzle VacuumTo Remove Blower Chute Nozzle Height Adjustment Using the Hose AssemblyLubrication Clean EquipmentGeneral Recommendations Check Engine OILClean Engine Service AIR CleanerService Spark Plug Service MufflerRemoving the Flail Screen Carburetor AdjustmentService and Adjustments Engine SpeedSharpening or Replacing Chipper Blade Disconnect and ground the spark plug wireStorage Yard VacuumEngine OtherProblem Possible Causes Corrective Action TroubleshootingParts List Part Description Part DescriptionSears Craftsman 6.0 H.P. Yard Vacuum Model Polo Green Oyster Grey Powder Black