Bissell 8975 Cleaning The Upper Tank & Filter, Cleaning The Pre-Motor and Post-Motor Filters

Unplug the cleaner from electrical outlet.

Cleaning The Upper Tank & Filter

Use only BISSELL Replacement Filters in your BISSELL Cleanview.

Upper Tank Filter 203-1085

1.

The Upper Tank Filter can be reached by removing the

2. Dirt Container, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight down to remove. Brush the dirt off the Louvers and Upper Tank Filter.

The foam Upper Tank Filter may be removed and hand

3. washed in cold water with mild detergent. Rinse well then air dry thoroughly before replacing.

The Upper Tank and Louvers may also be wiped clean

4. with a damp cloth.

Note: For easier access, the entire Upper Tank may be removed by turning the knob on the back of the cleaner to unlock and pulling the entire tank straight out.

Cleaning The Pre-Motor and Post-Motor Filters

Use only BISSELL Replacement Filters in your BISSELL CleanView.			W A R N I N G :
Pre-Motor Filter		203-1073
Post-Motor Filter		203-1009	Do Not operate cleaner
HEPA Media Post-Motor Filter		32076 (Select Models Only)	with	damp		or	wet
			filters	or	without all
1.	Unplug the cleaner from electrical outlet.		filters in place.
2.	The Pre-Motor Filter protects the motor from dirt particles.
	It is located in the slide out tray underneath the Dirt
	Container. If the filter becomes dirty, pull out the tray, lift
	out the filter and clean.		Pre-Motor
					Post-Motor
	The Post-Motor Filter assists in the filtration process to		Filter
3.					Filter
	return clean air to the room. It is located behind the door
	on the side of the cleaner. If the filter becomes dirty,
	open the door, remove the filter and clean.
	Note: Select Models come with a white, pleated
	HEPA Media Filter. This filter is not washable and
	must be replaced.
4.	The standard filters may be hand washed in cold water		W A R N I N G :
	with mild detergent. Rinse well and air dry thoroughly		To reduce the risk of injury
	before replacing.		from moving			parts,	turn
			off vacuum		cleaner		and
			disconnect		Power		Plug
			from electrical outlet.

9