Bissell 8910, 7901 Troubleshooting, Turn on the SmartTemp switch, Machine Power Switch is not

Page 20

Troubleshooting

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

SmartTemp Ready Light does not illuminate.

Possible Causes

Remedies

 

The SmartTemp switch is not

Turn on the SmartTemp switch.

turned ON.

 

 

The machine Power Switch is not

Both switches must be ON to

turned ON.

activate the SmartTemp Ready Light.

Reduced spray or no spray

 

Possible Causes

Remedies

Bladder may be empty.

Refill bladder with hot tap water.

SmartMix bottle may be empty.

Fill with BISSELL Advanced Cleaning

 

Formula for cleaning or water if

 

rinsing,or using the Scotchgard

 

protector applicator.

The filter may be clogged.

Tanks may not be seated properly.

Pump may have lost prime.

The Pump Belt may be broken.

Lift Here

Insert

Screwdriver

Blade Here

Clean out Flow Indicator Filter, page 17.

Turn power OFF; remove & reseat tanks. Inspect for presence of seals.

Turn power OFF; after 1 minute turn ON and depress trigger.

Turn the machine OFF and unplug from the outlet. To check if a Pump Belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the Belt Access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. You should be able to see the Pump Belt looped around the motor shaft. If it is broken or missing, please refer to Replacement Parts on pg.23 before calling Consumer Services. Complete installation instructions will accompany the replacement belt.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ProHeat Pro-Tech Thanks for buying a Bissell ProHeat Pro-Tech Important Safety Instructions Power Cord Fiber CleansingSmartTemp 16 oz. BissellHow to use this guide How To Put It TogetherSmartMix Special Features of your Bissell ProHeat Pro-TechSmartTemp Ready Light indicates when the heater is DirtLifter PowerBrush Choose the SmartMix setting that fits the cleaning jobTank-in-Tank Replace SmartMix concentrate bottleLid Rotate handle back down to the latched positionReadyTools Dial When It’s Time to Empty Tank-in-TankFlow Indicator Before You Clean Carpets OperationsMachine Preparation PreTreatingCarpet Cleaning Appears cleanCan’t see any more water being pulled up Instructions onNot use a knife or other utensil with sharp edges Stain RemovalResidue with a sweeper or vacuum Assembly When You’re DonePerfect Pass TurboBrushImmediately after cleaning and rinsing your carpets, empty Scotchgard Protector Applicator OptionalCleaning Technique May bleed through fabric when wetImportant Check Upholstery Tags Set SmartMix Dial to NormalCleaning Bare Floors Attach the Bare Floor ToolBare Floor Cleaning Technique Routine MaintenancePump Belt Replacement Locate and remove broken pump beltTo Install the Replacement Pump Belt Re-install the red retainer plate and Phillips head screwPlace the black brush arm onto the brush and slide black See illustrationMachine Power Switch is not TroubleshootingTurn on the SmartTemp switch Purge any residual Solution left Wrong setting for the cleaning jobPress down firmly on the black oval Window are snapped into the matingM. 9 p.m. EST M. 5 p.m. ESTReplacement parts Bissell ProHeat Pro-Tech 015-0621About Your Warranty
Related manuals
Manual 20 pages 52.67 Kb Manual 24 pages 32.33 Kb Manual 24 pages 47 Kb

8916, 8910, 7901 specifications

The Bissell 7901 is an innovative cleaning solution designed to tackle tough messes and provide exceptional performance for pet owners and families alike. This versatile cleaning machine combines powerful suction and advanced cleaning technologies to ensure that your floors remain spotless and your carpets stay fresh.

One of the standout features of the Bissell 7901 is its Multi-Cyclonic System. This technology maximizes the vacuum's suction power by separating dirt and debris from the air, preventing clogs and maintaining consistent cleaning performance. With this system, users can enjoy extended cleaning sessions without the worry of losing suction.

The Bissell 7901 is equipped with a powerful motor that drives its suction capabilities, allowing it to effectively lift pet hair, dirt, and allergens from a variety of surfaces, including carpets, rugs, and hardwood floors. Its lightweight design adds to its appeal, making it easy to maneuver as you clean different areas of your home. The vacuum’s ergonomic handle enhances comfort during use, reducing strain on the wrists.

Another impressive characteristic is the vacuum's filtration system. The Bissell 7901 uses a high-efficiency filter that captures allergens and fine dust particles, promoting a healthier indoor environment for you and your family. This is particularly beneficial for households with allergy sufferers or pets, as it helps reduce the amount of airborne allergens that can trigger reactions.

For added convenience, the Bissell 7901 features a large capacity dirt tank that is easy to empty. This means fewer interruptions during your cleaning sessions and less hassle when it comes time to dispose of the collected debris. Additionally, the vacuum comes with various attachments, such as upholstery tools and crevice tools, which enhance its versatility and make it suitable for cleaning a wide range of surfaces beyond just floors.

Overall, the Bissell 7901 is a powerful and user-friendly cleaning device that combines cutting-edge technology with functional design. Its multi-cyclonic suction, ergonomic features, and efficient filtration system make it an excellent choice for those seeking an effective solution for maintaining a clean and comfortable living space. Whether you’re a pet owner or simply someone who values cleanliness, the Bissell 7901 is a worthy addition to your cleaning arsenal.
Top Page Image Contents