Operating/Maintenance Instructions for your BISSELL Compact Canister
WARNING: Hold
plug when rewinding the cord onto the reel. Do not allow the cord to whip when rewinding.
Cord Storage
To extend the Power Cord for use, grasp the plug and gently pull out from the vacuum cleaner. When removing the Power Cord from the electrical outlet, switch off the power and grasp the plug. Your cleaner is equipped with an automatic rewind button. When cleaning is finished, switch off power and disconnect the plug from the electrical outlet, then press
on the Cord Rewind Button with your hand. The Cord will be rewound automatically.
Full Bag Indicator
You may continue cleaning until the Full Bag Indicator changes into the red color. This means the dust bag is full and needs to be replaced. If the indicator suddenly works and the cleaner loses suction power while in use, turn your cleaner off and check whether the hose, pipe or nozzle is clogged.
1.
4.
2.
Dust Bag Replacement
NOTE: Hose must be disconnected before changing bag. Replace the dust bag as soon as it is full.
1.To open the Dust Bag Compartment Door, lift the cover upward.
2.Remove the dust bag from the cleaner.
3.Dispose of the full bag and insert the cardboard bag collar of the dust bag as far as it can go on the suction inlet, and press down the locker. Position the dust bag so that no part of the bag is pinched.
4.The
5.Press the front of the Dust
Bag Compartment Door6.
down lightly until it
6.The Post Motor Filter is changed
by sliding the holder down and removing/replacing the Filter. 
6