Troubleshooting continued
Vacuum cleaner is difficult to push
Possible causes | Remedies |
1. Incorrect height setting | 1. Turn dial to higher setting |
Visible dust escaping from cleaner
Possible causes | Remedies | ||
1. | Filter tray missing or not installed properly | 1. | Check filter tray to make sure it is |
|
|
| fully inserted |
2. | Foam filter missing or not installed properly | 2. | Check foam filter for correct installation |
3. | HEPA filter cartridge missing or not installed properly | 3. | Check HEPA filter cartridge for |
|
|
| correct installation |
4. | Dirt container not installed properly | 4. | Make sure dirt container is correctly |
|
|
| positioned and snapped into place |
5. | Dirt container not assembled properly | 5. | Check screen, upper and lower portions of |
|
|
| the dirt container for proper assembly |
6. | Hose not installed properly | 6. | Make sure hose wand is fully seated in |
|
|
| base, make sure foot hose is properly |
|
|
| attached to diverter area |
7. | Hole or crack in hose | 7. | Check hose for holes or cracks and replace |
|
|
| if needed |
Other maintenance or service not included above should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
If you should happen to need assistance during assembly or operations, call
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 17 |
7/25/06 | 12:46:06 PM |