Operations
Power cord usage
1.To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there is a quick release cord wrap for easy cord remov- al. There is also a cord clip that is part of the upper cord wrap where you can attach the cord when vacuuming.
2.When you are finished cleaning, turn vacuum cleaner off.
3.Unplug power cord by grasping the plug (NOT the cord) and disconnect from outlet.
4.Loop power cord around cord wraps on side of vacuum cleaner. Be sure to first return the quick release cord wrap back to its original position before wrapping the cord.
5.Clip molded plug to power cord to secure.
1.
Quick Release Cord Wrap
Maintenance and care
To maximize your cleaning perfor- mance and extend the life of your vacuum, it is very important that you empty your dirt container and check and clean your filters fre- quently. Perform the following main- tenance steps:
1.Empty the dirt container when the dirt reaches the “Full” line on the container, or more frequently to prevent overfills. For best performance, empty after each use.
2.Check the
3.Replace the
NOTE: More frequent filter cleaning may be necessary if you are vacu- uming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple mainte- nance steps.
WARNING:
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical out- let before performing maintenance or troubleshooting checks.
Tip:
To maximize cleaning performance, check and clean or replace all filters as suggested.
*The Filter Media, not the vacuum as a whole, complies with the High Efficiency Particulate Air (HEPA) filter specification (EN
8w w w . b i s s e l l . c o m