Bissell 7901 warranty Lid, Rotate handle back down to the latched position

Page 8
Note: Both the SmartMix Bottle and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply either cleaning solution or water only.
When It’s Time to Empty Tank-in-Tank
Tank-in-Tank Continued
Lift the Tank-in-Tank handle. The handle locks the
2. lid in place.
3. Carry it like a bucket to fill at the sink.
Note: You may notice hair and debris deposits on
the carpet that were loosened by the brushing action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away. Debris that deposits in the Brush Belt should be cleaned between uses to keep the Belts running free.
Set the tank down and rotate the handle forward to
4. unlatch the lid. Lift off and set the lid aside.
Find the mouth of the Bladder and fill to the bottom of
5. the neck with clean hot tap water. *Do not boil or microwave water as it can destroy the Bladder.
Note: Fill the Bladder with clean hot tap water only.

Lift and Carry

3

4

Rotate Handle to Unlatch

6.

Replace the tank lid matching the lid and tank edges.

 

Handle must be in the forward position to reinstall.

 

 

Rotate the handle to the carrying position to re-latch

5

7.

Fill bladder only with

the lid.

clean hot tap water

 

 

8.

Replace tank in machine base, seating firmly in place.

 

9.

Rotate handle back down to the latched position.

 

9

Latched

Remove the Tank-in-Tank – follow steps 1 and 2

1. on page 7 and 8.

Carry the Tank-in-Tank, like a bucket, to the sink where

2. you will dispose of the dirty water.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ProHeat Thanks for buying a Bissell ProHeat Important Safety Instructions Brush Storage Crevice ToolQuick Release How to use this guide How To Put It TogetherSpecial Features of your Bissell ProHeat SmartTemp Ready Light indicates when the heater isSmartMix Will not allow it to exceedDirtLifter PowerBrush Tank-in-TankLid Rotate handle back down to the latched positionReadyTools Dial When It’s Time to Empty Tank-in-TankFlow Indicator Before You Clean Carpets OperationsMachine Preparation PreTreatingCarpet Cleaning Appears cleanCan’t see any more water being pulled up Instructions onNot use a knife or other utensil with sharp edges Stain RemovalResidue with a sweeper or vacuum Assembly When You’re DoneTurboBrush UseImmediately after cleaning and rinsing your carpets, empty Scotchgard protector Applicator OptionalCleaning Technique May bleed through fabric when wetImportant Check Upholstery Tags Set SmartMix Dial to NormalCleaning Bare Floors Attach the Bare Floor ToolBare Floor Cleaning Technique Routine MaintenancePump Belt Replacement Locate and remove broken pump beltTo Install the Replacement Pump Belt Re-install the red retainer plate and Phillips head screwPlace the black brush arm onto the brush and slide black See illustrationMachine Power Switch is not TroubleshootingTurn on the SmartTemp switch Wrong setting for the cleaning job Press down firmly on the black ovalWindow are snapped into the mating Tank-in-Tank has picked up maximum dirty waterM. 8 p.m. ET M. 10 p.m. ETReplacement parts Bissell ProHeat 015-0621About Your Warranty
Related manuals
Manual 24 pages 54.96 Kb Manual 24 pages 32.33 Kb

7901 specifications

The Bissell 7901 is an innovative cleaning solution designed to tackle tough messes and provide exceptional performance for pet owners and families alike. This versatile cleaning machine combines powerful suction and advanced cleaning technologies to ensure that your floors remain spotless and your carpets stay fresh.

One of the standout features of the Bissell 7901 is its Multi-Cyclonic System. This technology maximizes the vacuum's suction power by separating dirt and debris from the air, preventing clogs and maintaining consistent cleaning performance. With this system, users can enjoy extended cleaning sessions without the worry of losing suction.

The Bissell 7901 is equipped with a powerful motor that drives its suction capabilities, allowing it to effectively lift pet hair, dirt, and allergens from a variety of surfaces, including carpets, rugs, and hardwood floors. Its lightweight design adds to its appeal, making it easy to maneuver as you clean different areas of your home. The vacuum’s ergonomic handle enhances comfort during use, reducing strain on the wrists.

Another impressive characteristic is the vacuum's filtration system. The Bissell 7901 uses a high-efficiency filter that captures allergens and fine dust particles, promoting a healthier indoor environment for you and your family. This is particularly beneficial for households with allergy sufferers or pets, as it helps reduce the amount of airborne allergens that can trigger reactions.

For added convenience, the Bissell 7901 features a large capacity dirt tank that is easy to empty. This means fewer interruptions during your cleaning sessions and less hassle when it comes time to dispose of the collected debris. Additionally, the vacuum comes with various attachments, such as upholstery tools and crevice tools, which enhance its versatility and make it suitable for cleaning a wide range of surfaces beyond just floors.

Overall, the Bissell 7901 is a powerful and user-friendly cleaning device that combines cutting-edge technology with functional design. Its multi-cyclonic suction, ergonomic features, and efficient filtration system make it an excellent choice for those seeking an effective solution for maintaining a clean and comfortable living space. Whether you’re a pet owner or simply someone who values cleanliness, the Bissell 7901 is a worthy addition to your cleaning arsenal.
Top Page Image Contents