Bissell 3576 How To Maintain Your Vacuum, Power Cord Storage, Empty Dirt Container, Lock Position

Page 8

Power Cord Storage

When you are done using your vacuum, return it to the Upright position and store the Power Cord.

1.Turn vacuum cleaner off.

2.Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

3.Loop Power Cord around Cord Wraps on side of vacuum cleaner.

4.Clip molded plug to Power Cord to secure.

NOTICE:

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.

How To Maintain Your Vacuum

To maintain maximum cleaning performance, the following maintenance steps must be performed:

1.Empty the Dirt Container when the dirt reaches the “Full” line on the side.

2.Check the Inner and Outer Circular Filters and the Pre-Motor Filter at least once a month and clean or replace as needed.

3.Replace the Post-Motor Filter every three to six months.

Note: More frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.

WARNING:

To reduce the risk of electric shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Tip:

For maximum cleaning performance, check and clean or replace all filters as suggested.

Empty Dirt Container

The Dirt Container needs to be emptied when the dirt reaches the “Full” line on the side of the Container.

1.Unplug cleaner from electrical outlet.

2.Slide the Lock ‘n Seal Lever to the "Unlock" position.

3.Grasp handle and pull the Dirt Container straight out to remove from vacuum.

4.Empty dirt into garbage container.

5.Put the Dirt Container back in the vacuum and slide the lever to the "Lock" position.

 

Note: The Dirt Container may be washed in

 

warm water with a mild detergent. Remove

 

the Filter Cup from the bottom before

 

washing. Reassemble and make sure it is

8

completely dry before using again.

 

Full Line

Unlock

Lock Position

Position

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CleanView 3574/3576 SeriesThanks For Buying a Bissell CleanView Important Safety Instructions Risk of fire, electric shock, or injuryHandle Release Pedal Furniture Protection Guard Lock ’n Seal LeverHow To Use This Guide How To Put It TogetherAttach Handle To Vacuum Attach Vacuum Hose and ToolsHandle Positions How To Use Your VacuumHeight Adjustment Transporting Cleaner Special On-Board ToolsUse in tight narrow spaces Use with desired attachment for a longer reachHow To Maintain Your Vacuum Power Cord StorageEmpty Dirt Container Lock PositionPost Pre-MotorFilter Grasp Rotating Floor Brush at both ends and lift Check Rotating Floor Brush and Drive BeltReplace Drive Belt Unplug cleaner from electrical outlet Empty Dirt Container Replace LightbulbClearing Clogs LouversTools wont pick up dirt Vacuum cleaner won’t runTroubleshooting Vacuum cleaner is difficult to push Visible dirt escaping from cleanerPossible Cause Possible Causes RemediesPart Name Replacement Parts Bissell Cleanview II SeriesBissell Consumer Services Bissell Consumer Services If your Bissell product should require service Limited One Year WarrantyWarranty
Related manuals
Manual 16 pages 54.01 Kb

3576, 3574 specifications

The Bissell 3574 and 3576 models are part of Bissell's line of powerful and versatile carpet cleaners designed for tackling tough stains and maintaining the cleanliness of carpets and upholstery. Both models are praised for their user-friendly design and innovative technology that makes deep cleaning an efficient and thorough process.

One of the standout features of the Bissell 3574 and 3576 is their powerful cleaning system. Equipped with Bissell’s patented Heatwave Technology, these carpet cleaners maintain consistent water temperature throughout the cleaning cycle, which enhances the effectiveness of cleaning solutions. This ensures that dirt and stains are not only lifted but also eliminated, providing a deep clean in less time.

Another key feature is the Dual DirtLifter PowerBrush, which consists of multiple rows of bristles that work in tandem to lift embedded dirt from carpets. This technology ensures that even the most stubborn stains are effectively removed, making it an ideal choice for households with pets or children. The brushes are designed to be gentle on carpets while still delivering a robust cleaning action.

The Bissell 3574 and 3576 also feature a large clean water tank and dirty water tank, which allows for extended cleaning sessions without the need for frequent refills. This is particularly beneficial for larger areas or multiple rooms. The tanks are designed for easy filling and emptying, making the cleaning process more convenient.

The compact and lightweight design of both models enhances their maneuverability, making them easy to carry up and down stairs or around furniture. Additionally, the flexible hose attachment and included tools allow users to clean upholstery, stairs, and hard-to-reach areas with ease.

Both models are equipped with a quick-dry feature, which helps carpets dry faster after cleaning, reducing the downtime before the space can be used again. This is especially important in busy households where time is of the essence.

In conclusion, the Bissell 3574 and 3576 are excellent choices for anyone looking for efficient and effective carpet cleaning solutions. With their advanced technologies, user-friendly design, and versatility, these models stand out as reliable companions in the fight against dirt and stains in carpets and upholstery. Whether you are dealing with everyday spills or tougher stains, these carpet cleaners provide the power and convenience needed to achieve a beautifully clean home.
Top Page Image Contents