Bissell 3910, 6390 Operation, Attach vacuum hose and tools, Power switch, Twist n Snap Hose

Page 6

Assembly

Attach vacuum hose and tools

1.Line up the tabs on the base of the Twist ‘n Snap hose with the corresponding notches on the hose collar as shown.

2.Turn the Twist ‘n Snap hose to the left to lock the hose into place.

3.Connect the curved hose wand to the hose. Grasping the curved hose wand, slide the end of the curved hose wand onto the hose wand base. Snap the hose into the hose clip.

NOTE: The vacuum will not operate effectively unless the curved hose wand is firmly attached.

4.Slide the extension wand and crevice tool together into the storage clip.

5.Slide the dusting brush/upholstery tool into the storage clip.

6.Attach the TurboBrush by snapping it onto the top cap of the upper tank.

Operation

Power switch

The power switch is located just below the handle on the front of the vacuum. Push the rocker switch “ON” (I) to vacuum, and “OFF” (O) when cleaning is complete.

6 w w w . b i s s e l l . c o m

1.

Twist 'n

Snap Hose

6.

CAUTION:

Before using your vacuum, make sure that the dirt container is in the locked position and that all filters (pre-motor and HEPA post- motor) are in place. Do not operate your vacuum without these filters.

NOTICE:

For above floor cleaning, the floor brush will continue to rotate but is raised above floor. To prevent carpet damage, do not lean on the vacuum or let the powerfoot tilt forward.

CAUTION:

To avoid personal injury and to prevent the cleaner from falling when cleaning stairs, always place it at the bottom of the stairs.

8 0 0 . 2 3 7 . 7 6 9 1

ug603-2310_6390-3910_807.indd 6

8/13/07 10:06:21 AM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Power Trak Cyclonic/Momentum 9 0 / 3 9 1 0 S E R I E SThanks for buying a Bissell vacuum Important Safety Instructions Product view Twist ‘n Snap Hose Curved Wand Lower Hose Clip BaseAssembly Attach handle to vacuumAttach vacuum hose and tools Power switchOperation Twist n Snap HoseHeight adjustment Transporting cleanerHandle positions Clean filter indicator Special on-board toolsSpecial tools Power cord usage Quick Release Cord WrapsDirt reaches the Full line on the container Maintenance and careEmpty dirt container UnlockUnplug the vacuum from electrical outlet WashableMedia Filter Pre-MotorCheck rotating floor brush and drive belt Motor PulleyAir Passageway Replace drive belt Replace lightbulbReposition the lens and snap it back into place Maintaining TurboBrush Maintaining pet hair TurboBrushSelect models only Empty dirt container Check upper tank for build up or clogs Connecting Tube Hose Wand Base Bottom PortClearing clogs Grasp the curved wand and separate it fromCleaning the upper tank Replace the dirt containerVacuum cleaner and tools won’t pick up dirt TroubleshootingVacuum cleaner won’t run Vacuum cleaner is difficult to pushOr write M. 10 p.m. ETM. 8 p.m. ET PO BoxPart Name Replacement parts Bissell Vacuum196 910Warranty Bissell PowerTrak Cyclonic and Momentum Vacuums Limited One Year WarrantyIf your Bissell product should require service
Related manuals
Manual 20 pages 15.41 Kb

6390, 3910 specifications

The Bissell 3910, also known as the Bissell SpotClean ProHeat, is a top-rated portable carpet and upholstery cleaner designed to tackle tough stains and messes with ease. This compact cleaning machine is ideal for anyone who needs a quick and efficient way to clean upholstery, carpets, and even vehicle interiors. With its combination of powerful suction and specialized cleaning features, it offers a reliable solution for maintaining cleanliness in various settings.

One of the standout features of the Bissell 3910 is its built-in heating system. The ProHeat technology ensures that the water being used for cleaning is heated to provide an extra boost in stain removal. Hot water is often more effective at breaking down grime, and with this feature, users can experience enhanced cleaning results, particularly on stubborn stains.

The Bissell 3910 is equipped with strong suction capabilities, enabling it to lift dirt and stains from deep within the fibers of carpets and upholstery. This feature is essential for homes with pets or children, where spills and messes are a common occurrence. The small, lightweight design allows the unit to be maneuvered easily around the home, making it user-friendly for anyone.

Moreover, the cleaner comes with a variety of included attachments, such as the Tough Stain Tool and the HydroRinse self-cleaning hose tool. The Tough Stain Tool is perfect for targeting specific areas and is designed to apply cleaning solution precisely where it’s needed. On the other hand, the HydroRinse tool helps maintain the hose’s cleanliness after use, ensuring optimal performance by preventing the buildup of residue.

In terms of usability, the Bissell 3910 features a 48-ounce tank that holds a substantial amount of water and cleaning solution, allowing for extended cleaning sessions without frequent refills. Additionally, the unit is designed for easy maintenance, with quick access to the tanks for refilling and rinsing.

Overall, the Bissell 3910 SpotClean ProHeat stands out for its powerful performance, innovative technologies, and user-friendly design. Whether it's tackling pet messes, handling accidental spills, or keeping your car interiors tidy, this portable cleaner is a versatile companion for every household. With Bissell's reputation for quality and effective cleaning solutions, the 3910 is definitely a worthwhile investment for those seeking to keep their living spaces fresh and spotless.
Top Page Image Contents