Bissell 3596, 3595 warranty Replace Drive Belt, Motor Pulley Air Passageway, Replace Lightbulb

Page 12

Check Rotating Floor Brush and Drive Belt Continued

4.Grasp Rotating Floor Brush at both ends and lift.

5.Clean strings, hair and other debris from Rotating Floor Brush, paying particular attention to brush ends.

6.Clean strings, hair and other debris from Motor Pulley and Drive Belt areas.

7.Check Drive Belt carefully for wear, cuts or stressed areas.

8.Check Air Passageway for obstructions. Remove debris from this area.

Replace Drive Belt

1.Unplug cleaner from electrical outlet.

2.With Rotating Floor Brush removed from vacuum cleaner (Steps 1-4 of check Rotating Floor Brush and Drive Belt), grasp old Drive Belt and remove from Motor Pulley.

Discard old Drive Belt.

3.Place new Drive Belt over Motor Pulley and stretch other end over Rotating Floor Brush in the space between the bristles.

4.Place ends of Rotating Floor Brush down into slots on sides as shown.

5.Turn Rotating Floor Brush by hand several times in the direction of Motor Pulley. If properly installed, Drive Belt will centre itself on Rotating Brush crown.

6.Reposition Brush Cover and screw or snap back into place. Check to be sure all screws or latches are secure.

Replace Lightbulb

1.Unplug cleaner from electrical outlet.

2.Using a screwdriver, remove the two screws as shown and lift off the lens.

3.Remove the bulb from the socket by grasping bulb and pulling straight out. Install the new bulb by pushing it gently into the socket until the bulb snaps into place.

4.Reposition lens and secure with the two screws.

Maintaining TurboBrush

Select Models Only

The TurboBrush should be checked regularly for clogs or debris wrapping around the brush roll.

1.

Unplug vacuum from electrical outlet.

 

2.

If a clog is present or debris is visible, unscrew the two

screws on the back of the TurboBrush to remove the

 

 

faceplate and clear any obstructions.

3.

To clean debris from the brush roll, remove the screw

located by the brush roll with a Phillips head screwdriver.

 

Motor Pulley

Air Passageway

12

Lift the belt cover. Remove the brush roll from the drive belt and clean debris.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CleanViewTM/ PowerTrakTM Thanks For Buying a Bissell CleanViewTM PowerTrakTM Important Safety Instructions Risk of fire, electric shock, or injuryDusting Brush/ Upholstery Tool LockHow To Use This Guide How To Put It TogetherAttach Handle To Vacuum Vacuum bodySelect Models Only Attach Vacuum Hose and ToolsHow To Use Your Vacuum Height AdjustmentTransporting Cleaner Handle PositionsClean Carpet Sensor Clean Filter IndicatorPower Cord Storage Special On-Board ToolsHow To Maintain Your Vacuum Full LinePosition Screen Empty Dirt ContainerCleaning The Upper Tank & Filter FilterCheck Rotating Floor Brush and Drive Belt Replace Drive Belt Motor Pulley Air PassagewayReplace Lightbulb Maintaining TurboBrushBissell Consumer Services Suction Inlet Hose Wand Base Air PassagewayMonday Friday SaturdayTroubleshooting Dirt Container or Upper Tank not installed properlyRemove brush and clean debris from brush ends Possible Causes RemediesReplacement Parts Bissell Vacuum Wire Reinforced Twist ‘n Snap Vacuum Hose ClearStyle 7/9/10 Drive Belt 2-Pack Dusting Brush/Upholstery ToolWarranty Or call Bissell Consumer ServicesMail Saturday 9 a.m. 8 p.m. ET

3595, 3596 specifications

The Bissell 3596 and 3595 are powerful carpet cleaner models designed to tackle tough stains and revitalize carpets, upholstery, and other surfaces in your home. Both models embody Bissell's commitment to high-performance cleaning and are particularly effective for pet owners.

One of the standout features of the Bissell 3596 and 3595 is the innovative Heatwave Technology. This technology helps to maintain consistent water temperature throughout the cleaning process, ensuring that dirt and grime are effectively loosened and lifted from carpets. The machines utilize a powerful brush system that rotates at high speeds, providing deep cleaning action that penetrates even the most stubborn stains.

Another notable characteristic of these models is their lightweight and ergonomic design, which makes them easy to maneuver. Weighing in at under 20 pounds, they can be easily carried up and down stairs or moved from room to room. The flexible hose and variety of attachments included with both models enhance their versatility, allowing users to target hard-to-reach areas and clean upholstery, stairs, and upholstery with ease.

The Bissell 3596 and 3595 both feature a large, easy-to-fill clean water tank, which means fewer interruptions during cleaning sessions. The dirty water tank is also easy to empty and clean, ensuring a hassle-free maintenance experience.

In addition to these practical features, Bissell has integrated a professional formula into both models. This formula is designed to break down tough stains from pet accidents, food spills, and other common messes, providing a thorough clean without damaging carpet fibers.

Moreover, both models come equipped with a removable, washable filter, contributing to the longevity of the machines and enhancing their suction power over time.

With their blend of advanced technology, user-friendly design, and powerful cleaning capabilities, the Bissell 3596 and 3595 are excellent choices for anyone looking for an effective solution to indoor stains and odors. Whether you have pets or young children, these carpet cleaners are built to make your life easier while keeping your home looking fresh and clean. Bissell’s commitment to quality and performance ensures that these machines are a valuable addition to any household cleaning toolkit.
Top Page Image Contents