Special On-Board Tools
Your vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools.
1.Raise Handle to Upright Position.
2.Grasp the Quick Reach Handle and lift Hose Wand to separate from suction intake opening.
3.Attach tools by firmly pushing onto Vacuum Hose or Extension Wand.
Dusting Brush Tool (Select Models): Use to dust furniture, blinds, books, lamps, shelves, draperies, and cushions.
Dusting Brush/Upholstery Tool (Select Models): Two types of cleaning tools in one attachment.
•Use the Dusting Brush to dust furniture, blinds, books, lamps, shelves and baseboards.
•Slide the brush off to use the Upholstery Tool on cushions, draperies and fabrics.
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment for a longer reach.
TurboBrush (Select Models): Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using the TurboBrush to gain maximum cleaning. Too much pressure will cause the brush to stop rotating.
Stair Cleaning Tool (Select Models): Use for stairs, area rugs, and other small carpeted areas. This tool can also be used for bare floors.
All items may not be included with your model. More tools are available; to order please refer to page 15.
Tip:
Hair, string and small objects can block the Vacuum Hose or Tools. Check them occasionally for obstructions.
NOTICE:
The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.
Power Cord Storage
When you are done using your vacuum, return it to the Upright position and store the Power Cord.
1.Turn vacuum cleaner off.
2.Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.
3.Loop Power Cord around Cord Wraps on side of vacuum cleaner.
4.Clip molded plug to Power Cord to secure.
CAUTION:
The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the cleaner with the Carrying Handle at the back of the cleaner. Always place vacuum cleaner on floor with Handle in Upright position when using tools. Never place your fingers under the cleaner when it is running. Never place Powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough to objects to pull them into rotating brush.
9