![](/images/new-backgrounds/1050386/5038615x1.webp)
Operation
Clean filter indicator
Select Models Only
The clean filter indicator tells you when the airflow in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green while the unit is running until the airflow is reduced by a clog or dirty filter. At that time, it begins to change to red or black. When it is fully red, the airflow is significantly reduced or clogged by a dirty filter. Follow the steps on page 11 to clean your filters. All filters in the vacuum should be cleaned or replaced when the clean filter indicator turns red.
If the indicator turns black, it means you have a clog in your hose. To check and remove the clog, remove the hose from the unit by turning the Twist ‘n Snap hose to the right. Try to visually locate the clog. Once you have done this, use a blunt long object such as a broom handle to loosen and remove the debris. Once this is completed, reassemble the hose to the unit.
If the indicator remains red or black with the vacuum running, follow the steps on page 15 to check for and clear clogs.
NOTE: When your vacuum is turned off, the clean filter indicator will go to the red color setting. The clean filter indicator only detects reductions in airflow when the vacuum power is on.
Clean
Filter
Indicator
NOTICE:
While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.
Dusting Brush/
Upholstery Tool
Special on-board tools
Your vacuum is not only a powerful carpet and | Crevice Tool | |
rug cleaner, it’s also a versatile above floor |
| |
vacuum cleaner when you select one of the | Extension Wand | |
special tools. |
| |
1. | Raise the handle to the upright position. |
|
2. | Grasp the curved hose wand handle to | Curved Hose |
| separate from hose wand base. | Wand |
3.Attach tools by firmly pushing onto vacuum hose, curved hose wand or extension wand. They are a friction fit, so be sure the hose and tool fit snuggly together.
Dusting Brush/Upholstery Tool: Two types of |
| |
cleaning tools in one attachment. | Hose Wand Base | |
• | Use the dusting brush to dust |
|
| furniture, blinds, books, lamps, |
|
| shelves and baseboards. |
|
• | Slide the brush off to use the |
|
| upholstery tool on cushions, |
|
| draperies and fabrics. |
|
8 w w w . b i s s e l l . c o m
2/7/07 4:03:41 PM