Powerfoot Height Adjustment
The Powerfoot/Rotating Floor Brush on your BISSELL vacuum can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
1. Place Handle in Upright Position.
2. Turn Floor Surface Selector to desired setting. Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets. Highest Setting - For plush pile carpet.
3. Place the Handle into the Normal Cleaning position and the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while in the Normal Cleaning Position.
Tip:
Hair, string and small objects can block the Vacuum Hose or Tools. Check them occasionally for obstructions. See Troubleshooting Guide for instructions.
Special Tools
Your BISSELL vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum when you select one of the special tools.
1. Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift up to separate from suction
2. intake opening.
3. Attach tools by firmly pushing onto Hose Wand or Extension Wand.
Combination Upholstery/Dusting Brush Tool:
Two types of cleaning tools are included in one attachment: rotate for desired tool.
■Use Brush side to dust furniture, blinds, books, lamps, shelves.
■Use Upholstery side for curtains, draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachments for a longer reach.
TurboBrush (Select Models):
Use rotating brush action for small areas such as stairs and upholstery.
Note: Press gently when using the TurboBrush to gain maximum cleaning. Too much pressure will cause the brush to stop rotating.
Stair Cleaning Tool (Select Models):
Use for stairs, area rugs, and other small carpeted area. This tool can also be used for bare floors.
All items may not be included with your model. More tools are available; to order please refer to page 11.
6
NOTICE:
The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.
CAUTION:
The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts, always move the vacuum with the Carrying Handle at the back of the vacuum. Always place vacuum on floor with Handle in Upright position when using tools. Never place your fingers under the vacuum when it is running. Never place Powerfoot on furniture or uneven surfaces. Do not place vacuum close enough to objects to pull them into rotating brush.