Bissell 8910, 1699 warranty Machine Care, Flow Indicator, Machine and wrap the power cord

Page 12

After Cleaning (Continued)

Machine Care

Flow Indicator

For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete.

1.

Turn Power and Heater switches OFF ( 0 ). Unplug

 

2.

the machine and wrap the power cord.

 

After emptying the Water Tank, rinse it out at a

 

 

faucet with running hot tap water, taking care to

 

 

clean underneath the Heavy Duty Bladder, and all

 

3.

around it. Clean out lint trap.

 

Replace the Tank in tank on the machine.

4

4.

Clean out the flow indicator filter each time it is used

 

to ensure best cleaning performance. Unscrew the Flow indicator cap, lift out the red rotor and white filter. Rinse all three parts with water. Replace the filter and rotor. Replace the Flow indicator cap. Turn until snug, do not over-tighten.

5.Any loose hair or debris can be pulled from the brush roll if desired and thrown away.

6.Wipe the machine’s exterior with a soft cloth.

7.After carpet is dry, vacuum again to remove hair and fuzz.

Post-Treatment Scotchgard Protector* (Optional) (*Available on select models)

Some ProHeat models are equipped with a Scotchgard Protector post treatment applicator and cartridge. Using this, along with one of the BISSELL cleaning formulas containing Scotchgard, helps

to retain the carpet cleanliness achieved with the ProHeat machine. For best results, the post cleaning treatment should be applied while the carpet is still damp. It is recommended that the Scotchgard protector be applied every 12 months to all clean carpeted areas, and after every deep cleaning for high traffic areas such as entry ways and stairs.

1.Immediately after cleaning and rinsing your carpets, empty the Water Tank and refill the Heavy Duty Bladder with clean, hot tap water.

2.Set the Ready Tools dial to the Tools/Pretreat setting. This will allow spray from the hose.

3.Purge the hose to eliminate cleaning solution from the tube by spraying clean water through the hose without attachments into a sink for 15-30 seconds.

4.Attach Scotchgard post-applicator cartridge to the Applicator Tool, following the instructions on the cartridge. Attach the combined Tool/Cartridge to the hose. The water from the Tank in Tank will automatically mix with the concentrated Scotchgard post-treatment formula contained in the cartridge.

5.Turn the SmartMix Dial to the Water Rinse/Carpet

Protector setting.

12 w w w . b i s s e l l . c o m

Tip:

If clogged, soak applicator tool in hot tap water before using.

3

4

8 0 0 . 2 3 7 . 7 6 9 1

ug310-5868_1699_306.indd 12

3/1/06 3:13:52 PM

Page 11 Page 13
Image 12
Page 11 Page 13
Contents ProHeat Thanks for buying a Bissell ProHeat This model is for household uses only Optional Accessories Upholstery Tool PreTreat Wand TurboBrushBissell Formulas How to Use this Guide Upper HandlePhillips head screwdriver Special Features of Your Bissell ProHeat DirtLifter PowerBrushThis feature is available on all ProHeat models SmartTempFlow Indicator Tank-in-TankReady Tools Dial To maintain your Scotchgard 5-yearBefore You Clean Carpet CleaningFill The Water Tank Fill The SmartMix/Formula TankChoose The SmartMix Setting Power SwitchCleaning strokes Set Ready Tools DialAfter Cleaning Empty The TankRinse Optional Machine StorageFlow Indicator Machine and wrap the power cordMachine Care Cleaning with Attachments Post-Treatment Scotchgard Protector* OptionalManufacturer’s tag One 8 oz. cartridge protects 200 square feetCleaning Fluid Section Deep cleaner. NonBare Floor Cleaning Stain RemovalTroubleshooting / User Maintenance Reduced spray or no sprayElectric shock or injury Servicing SmartTemp Ready Light does not illuminateDirtLifter PowerBrush does not turn Carpet Protector is not spraying. Select Models OnlyReduced spray or no spray Brush Belt or Pump Belt is off or brokenBissell Consumer Services Cleaner not picking up solutionRemedies Replacement parts Bissell ProHeat Part NameNot all parts are included with every model Warranty Bissell ProHeat Limited One Year WarrantyIf your Bissell product should require service
Related manuals
Manual 22 pages 62.08 Kb Manual 24 pages 28.15 Kb Manual 24 pages 32.27 Kb Manual 24 pages 54.96 Kb Manual 24 pages 32.33 Kb

1699, 8910 specifications

The Bissell 8910,1699 is a versatile carpet cleaner that has gained popularity among homeowners seeking an efficient solution for maintaining clean carpets and upholstery. This machine combines powerful cleaning capabilities with user-friendly features, making it a favored choice in households.

One of the standout features of the Bissell 8910,1699 is its Heatwave Technology. This innovative feature maintains water temperature throughout the cleaning process to ensure that dirt and stains are effectively loosened and removed. The ability to use hot water in conjunction with cleaning solutions enhances the cleaner's effectiveness, allowing for a deeper clean.

The Bissell 8910,1699 is equipped with a dual tank system, which keeps clean and dirty water separate. This design allows users to clean without the worry of reapplying dirty water onto the carpet. The clean water tank can hold up to 48 ounces, providing ample capacity for larger cleaning tasks while minimizing the need for frequent refills.

Another notable characteristic of the Bissell 8910,1699 is its lightweight and compact design. Weighing in at around 19 pounds, this carpet cleaner is easy to maneuver, making it ideal for both large areas and tight spaces. Its slim profile ensures that it can be stored conveniently, without taking up excessive space in a closet or utility room.

The machine also features a 3-inch tough stain tool which is specifically designed for concentrated cleaning of tough stains and high-traffic areas. This accessory is perfect for tackling pet stains, food spills, and other stubborn marks that may be difficult to clean with standard tools.

Additionally, the Bissell 8910,1699 utilizes a variety of cleaning formulas to enhance its performance. The cleaner is compatible with Bissell’s lineup of cleaning solutions, including detergent specifically designed for pet stains, ensuring maximum effectiveness against all types of messes.

For those concerned about maintenance, the Bissell 8910,1699 comes with a removable and washable brush roller, which helps maintain the machine’s performance over time. This feature ensures that the brushes remain clean and effective for optimal results.

In conclusion, the Bissell 8910,1699 is a robust carpet cleaner that provides powerful cleaning capability with advanced technologies like Heatwave Technology and a dual tank system. Its lightweight design, versatile tools, and effective cleaning formulas make it an excellent choice for maintaining the cleanliness of carpets and upholstery in any home.
Top Page Image Contents