Bissell 82G7 warranty Maintaining TurboBrush, Unplug the vacuum from electrical outlet

Page 14

Maintenance and care

Maintaining TurboBrush

The TurboBrush should be checked regularly for

 

clogs or debris wrapping around the brush.

2.

1.Unplug the vacuum from electrical outlet.

2.If a clog is present or debris is visible, unscrew the two screws on the back of the TurboBrush to remove the faceplate and clear any obstructions.

3. To clean debris from the brush, remove the

4.

brush from the drive belt and clean debris.

 

4.Reposition the drive belt on the brush. Place ends of brush in slots on sides as shown. Reposition faceplate and secure with two screws.

14 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Image 14
Contents Momentum G 7 S E R I E SThanks for buying a Bissell vacuum Important Safety Instructions Product view Assembly Attach handle to vacuumAttach vacuum hose and tools Power switchOperation Handle positions Height adjustmentTransporting cleaner Dusting Brush/Upholstery Tool Two types Clean filter indicatorSpecial on-board tools Power cord usage Maintenance and care Empty dirt containerUnplug the vacuum from electrical outlet Check rotating floor brush and drive belt Replace drive belt Replace lightbulbMaintaining TurboBrush Unplug the vacuum from electrical outletBase, the wand or in the hose Clearing clogsEmpty dirt container Cleaning the upper tank Vacuum cleaner is difficult to push TroubleshootingVacuum cleaner and tools won’t pick up dirt Visible dirt escaping from cleanerAuthorized service representative Please do not return this product to the storePart Name Replacement parts Bissell Vacuum196 Website or E-mail Limited One Year WarrantyIf your Bissell product should require service Or Call