Bissell 17G5 Maintenance and care, Power cord storage, Transporting cleaner, Carrying Handle

Operation

Power cord storage

When you are finished using your vacuum, return it to the Upright position and store the power cord.

1.Turn vacuum cleaner off by pushing the

power switch.

2.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

3.Loop power cord around cord wraps on back of handle.

4.Clip molded plug to power cord to secure.

Transporting cleaner

1.To move your vacuum cleaner from room to room, put the Handle in the Upright Position, tilt the cleaner back on its rear wheels and push forward.

2.The cleaner can also be moved by using the carrying handle on the dirt container.

Maintenance and care

To maintain maximum cleaning performance, the following maintenance steps must be performed:

1.Unplug cleaner from electrical outlet.

2.Empty the dirt container when the dirt reaches the “Full” line on the back.

3.Check the pre-motor filter at least once a month and clean and replace as needed.

4.Check and replace the HEPA media post-motor filter as needed.

NOTE: More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns.

Follow the instructions on the following pages to perform these simple maintenance steps.

NOTICE:

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply.

2. Carrying Handle

1.

WARNING:

To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Tip:

For maximum cleaning performance, check and clean or replace all filters as suggested.

Full Line

8 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1