Bissell 17G5 Assembly, Attach handle to vacuum, Attach vacuum hose & on-board tools, Vacuum body

Page 5

Assembly

The only tool you’ll need to assemble your vacuum cleaner is a Philips head screwdriver.

Remove handle and tools from box

1.Locate and remove the deluxe floor tool, extension wand, bendable wand attachment, dusting brush, TurboBrush®, crevice tool and accessory bag from box.

2.Locate and remove vacuum handle and Twist ‘n Snap Hose and set aside.

3.Lift vacuum body out of box using carrying handle on dirt container.

Warning:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

2.

Attach handle to vacuum

1.Take vacuum handle and remove the screw packet taped to the base of the handle.

2.Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top

of the vacuum body.

4.

 

3.Check to be sure the handle is fitted to the vacuum body. If there is a gap in front, con- tinue to push firmly until the handle is flush.

4. Insert the two screws from the screw packet into the existing holes. Tighten securely with a screwdriver.

Attach vacuum hose & on-board tools

1.Position the Twist ‘n Snap Hose assembly on the vacuum and line up the tabs on the base of the hose with the corresponding notches.

Turn the Twist ‘n Snap Hose to the right to lock 1. into place.

2.Slide the end of the hose into the hose base. Make sure the tab on hose wand inserts into hole on front side of handle. Place the hose into the hose clip.

NOTE: The powerfoot will not operate effectively

2.

unless the hose is firmly attached to the base.

 

3.Snap the bendable wand attachment into front

side of handle.

3.

4.Place the remaining tools into accessory bag.

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Warranty Thank you for buying a Bissell PROlite Multi Cyclonic vacuum Important Safety Instructions Adjustment Power Switch HandleProduct view GuardAttach handle to vacuum AssemblyAttach vacuum hose & on-board tools Vacuum bodyAutomatic height adjustment Power switch/brush power switchPower on/off Brush on/off OperationSpecial tools Power cord storage Maintenance and careTransporting cleaner Carrying HandleUnplug the cleaner from electrical outlet Cleaning the inner cycloneEmptying the dirt container ScreenPost-Motor Filter Cleaning the pre-motor and Hepa media post-motor filterPre-Motor Filter Brush reset Rotating brush and drive belt maintenanceCleaning clogs To remove clogs from the hose baseRefer to the Cleaning Clogs section on pg.12 TurboBrush maintenanceElectronic protector Air PassagewayPossible causes TroubleshootingRemedies Possible causes RemediesSaturday Bissell consumer serviceMonday Friday Monday Friday Replacement parts -­ Bissell PROlite Multi Cyclonic seriesSaturday Part NameSaturday 9 a.m. 8 p.m. ET WarrantyPO Box
Related manuals
Manual 16 pages 31.27 Kb

17G5 specifications

The Bissell 17G5 is a powerful and versatile carpet cleaner designed to tackle tough stains and provide deep cleaning for a variety of surfaces. This model is widely recognized for its effectiveness, user-friendly design, and range of features that make it a top choice for homeowners seeking a reliable cleaning solution.

One of the standout features of the Bissell 17G5 is its lightweight design. Weighing in at just under 20 pounds, it’s easy to maneuver around the house, allowing for efficient cleaning without the strain that heavier machines can cause. This is particularly beneficial for those who may have difficulty with more cumbersome carpet cleaners.

The Bissell 17G5 is equipped with a powerful dual-motor system that provides strong suction for effective dirt and stain removal. This technology is complemented by its unique Dirty Water Tank, which holds the collected waste water, making it simple to see when it’s time to empty and clean. The tank’s design also minimizes spills and messes, allowing users to clean confidently.

One of the most impressive aspects of the Bissell 17G5 is its ability to handle a variety of cleaning tasks. It comes with a range of attachments, including a tough stain tool, which makes it suitable for cleaning upholstery, stairs, and even car interiors. This versatility means that users can rely on it for more than just carpets; it’s a multi-surface cleaner that adapts to various situations.

Effective cleaning is further enhanced by the inclusion of heatwave technology. This feature helps maintain consistent water temperature throughout the cleaning process, ensuring that cleaning solutions are maximized for effective stain removal. The heat also promotes faster drying times, which is a critical factor in preventing mold and mildew growth in moist environments.

The Bissell 17G5 also prides itself on its simplistic maintenance. The machine is designed with easy-to-access components, making it straightforward to clean the machines after use. The tanks can be removed quickly, and filters can be replaced or cleaned with minimal effort.

In conclusion, the Bissell 17G5 is a powerful carpet cleaner that combines lightweight design, versatile attachments, strong suction power, and innovative technologies to deliver excellent cleaning results. Whether for carpets, upholstery, or hard-to-reach areas, this machine stands out as an efficient cleaning companion for any household. Its user-friendly features and effective cleaning performance make it a worthy investment for anyone looking to maintain a clean and healthy living environment.
Top Page Image Contents