Bissell 1719 warranty Operations, Charging the battery, Filling the solution/clean tank

Page 6

Operations

Charging the battery

1.When charging for the first time, allow to charge uninterrupted for at least 12 hours.

NOTE: When charging, the Spot Lifter 2X and charger may become warm to the touch. This is normal and no cause for concern.

2.Spot Lifter 2X must be in “O” (OFF) position to charge.

3.When completely charged, your Spot Lifter 2X will operate for up to 15 minutes. When completely discharged, it will take approximately 12 hours to fully recharge.

4.To charge your Spot Lifter 2X, connect the round end of the charger cord into the power port on the back of the unit.

NOTE: Decreased operating time may indicate that the battery has built up a charging resistance. To recharge, first completely exhaust the battery, recharge it, then exhaust it once again before recharging a second time. This procedure may be required more than once.

Tip:

For maximum battery life, completely discharge and recharge Spot Lifter 2X every 1-2 months.

Tip:

After unit is charged (approximately 12 hours) unplug from outlet.

This will aid in prolonging the life of the battery.

1.

Filling the solution/clean tank

1.Remove solution/clean tank by grasping it firmly and pulling straight up.

2.Unscrew and remove the cap. Add water and formula* to the indicated fill lines on the solution/ clean tank

*Note: Your Spot Lifter 2X includes two trial size bottles of formula.

3.Replace cap and place solution/clean tank back on unit.

2.

Water Fill Line

WATER

FORMULA

Formula Fill Line

3.

66 w w w . b i s s e l l . c o m

ug603-5419_1719E_1006.indd 6

10/26/06 3:37:33 PM

Image 6 Contents
E R ’ S G U I D E 1719 Series W . b i s s e l l . c o m Reduce the risk of fire, electric shock, or injury Do not use with any opening blockedSeek medical attention Product view How to use this guide Product featuresOperations Charging the batteryFilling the solution/clean tank Spot Lifter 2X must be in O OFF position to chargeTurn power switch I on Spot cleaning carpetSpot cleaning upholstery Let cleaning solution set for 3-5 minutes before cleaningMaintenance and care Machine careNi-Cad Screws Back and forth TroubleshootingSpray tip clogged Rinse tip with clean water Batteries weak/underchargedReplacement Parts Bissell Spot Lifter Warranty Bissell Spot Lifter Monday Thursday
Related manuals
Manual 12 pages 35.33 Kb Manual 12 pages 25.98 Kb Manual 12 pages 60.14 Kb