Troubleshooting
Reduced Spray OR No Spray in Upright Mode
Possible causes | Remedies | ||
1. | Solution tank empty | 1. | Refill tank with water and formula |
2. | Lint screen on solution tank cap clogged | 2. | Soak solution tank cap in warm water and then rinse under |
|
|
| running water |
3. | Upper body not properly attached properly. | 3. | Repeat steps |
Reduce Spray or No Spray Attachment |
| ||
Possible causes | Remedies | ||
1. | Solution tank empty | 1. | Refill tank with water and formula |
2. | Spray Nozzle Clogged | 2. | Clean Spray nozzle by rinsing tool under water |
3. | Pump needs priming | 3. | Place tool on floor and press trigger |
4. | Machine is reclined | 4. | Return machine to full upright position until it locks |
|
|
| into place |
5. | ReadyTools dial is set to “FLOOR CLEANING” | 5. | Choose “TOOLS” setting on ReadyTools dial |
Deep cleaner not picking up cleaning solution | |||
Possible causes | Remedies | ||
1. | Collection tank not aligned/secured | 1. | Check tank alignment and secure with side latches |
2. | Collection tank full | 2. | Empty tank |
3. | Removable nozzle installed improperly | 3. | Unplug unit. Align four "hooks" into bottom first, then snap |
|
|
| into place on top |
4. | Removable nozzle full of debris | 4. | Unplug unit. Remove nozzle and rinse under running water |
5. | Red lint screen under collection tank clogged | 5. | Remove debris from lint screen |
6. | ReadyTools dial not set properly | 6. | Choose either “FLOOR CLEANING” or “TOOLS” for desired |
|
|
| cleaning method |
Other maintenance or service not included in the manual should be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at
12 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |