How to use your BISSELL QuickSteamer
How to begin
WARNING:
1.
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
To reduce the risk of fire, use only BISSELL Advanced Cleaning Formulas for Deep Cleaning Machines.
Use of cleaning formulas
2. coffee/cocktail tables, etc.) from room if needed.
that contain lemon or pine oil may damage this appliance and void warranty.
3.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean in 3’ X 4’
Chemical spot cleaners or
4. sections, starting in areas farthest from exit. Plan to leave a path open to empty soiled water and refill cleaner.
Carpeting will dry in three to four hours, depending on
5. carpet style and air circulation in room. A floor fan speeds drying.
Replace furniture on damp carpeting by placing waxed
6. paper under legs until floor dries completely.
Getting ready
Remove the Clean Water Tank by lifting it straight up,
1. then away from the Lower Body.
Using the Formula Measuring Cap, add two (2) capfuls of
2. BISSELL® Advanced Cleaning Formulas for Deep Cleaning Machines to the Clean Water Tank. Add 1/2- gallon of hot (NOT boiling) tap water. Fill only to fill line – do not overfill.
plastic materials used in your QuickSteamer,® causing cracking or pitting.
Tip:
Always vacuum thoroughly before you deep clean. If possible, move larger furniture to an area you will not be cleaning.
2.
Formula
Measuring
Cap
Replace and turn Formula Measuring Cap clockwise
3. until secure.
Unscrew to Remove
4.
Place Clean Water Tank on Lower Body.
Rotate Quick Release Cord Wrap™ to release the Power
5. Cord and plug into an outlet.
Turn Power Switch [located on the side of the Lower
6. Body] to ( ) ON.
If cleaner starts when first plugged in, switch cleaner
7. OFF (
) until ready for use.
6.
Power Switch
6