Bissell 1698 warranty Machine Preparation, PreTreating Optional, Carpet Cleaning, Floor Cleaning

Page 11

 

Machine Preparation

 

Set up the machine following instructions in

1.

the Features section on pages 6-10.

2.

Use any BISSELL Advanced Deep Cleaning Formula in

the SmartMix Bottle when cleaning carpets, stairs or

 

upholstery. Use clean water in the SmartMix Bottle for

 

gentle cleaning or rinsing.

3.

Choose the SmartMix setting to match the cleaning job.

4.

Set the ReadyTools switch to either Tools/PreTreat or

 

Floor Cleaning.

PreTreating (Optional)

PreTreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as hallways and stairs.

1.

Set the SmartMix Dial to High Traffic.

 

2.

Set ReadyTools Dial to PreTreat.

 

3.

Plug into a proper outlet and turn the Power Switch ON.

4.

While pressing the trigger, slowly make several passes

over the area to be cleaned.

 

Caution: Do not overwet.

5.

Turn the Power Switch OFF and let the BISSELL

Advanced Deep Cleaning Formula dissolve the tough soil

 

for 1-2 minutes before continuing.

 

Carpet Cleaning

1.

Plug into a proper outlet and turn the Power Switch

ON. Wait two minutes for the heater to warm up before

 

beginning to clean.

2.

While pressing the trigger, make one slow forward wet

pass and another one back. Let the SmartTemp heated

 

formula and DirtLifter Powerbrush do the work for you.

 

Caution: Do not overwet.

 

Note: Take care not to run over loose objects or

 

edges of area rugs. Stalling the brush may

 

result in premature belt failure.

3.

Release the trigger and make one slow forward and back

pass over the same area to remove any residual dirty water.

WARNING:

To reduce the risk of inju- ry, be extra careful when cleaning stairs. Make sure machine is secure and level.

ATTENTION BERBER CARPET OWNERS:

Some Berber Carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on pages 12-13.

11

Image 11
Contents Series 220 PowerWash ProHeatThanks for buying a Bissell PowerWash ProHeat Important Safety Instructions Spraying Crevice Tool PowerWash ProHeat assembly is now complete How To Use This GuideHow To Put It Together Replace the Valve Cap, turning until snug Special Features of your Bissell PowerWash ProHeatSmartMix SmartTemp Ready Light indicates the heater is ON. ItReplace SmartMix Bottle DirtLifter PowerBrushChoose the SmartMix setting that fits the cleaning job Tank-in-Tank When It’s Time to Empty Tank-in-TankReadyTools Dial Flow IndicatorTools/PreTreat setting Operations Before You Clean Carpets TurboBrush Assembly and UseWhen You’re Done PreTreating Optional Carpet CleaningFloor Cleaning Machine PreparationStain Removal Solution or waterSet SmartMix Dial to Normal Use your Bissell Deep Cleaner as a Precleaner. WithCheck manufacturer’s tag before cleaning. W or WS on Vacuum thoroughly to pick up loose debris and pet hairAttach the Bare Floor Tool Cleaning TechniqueCleaning Bare Floors Cord Quick Release Routine MaintenanceTurn Power Switch OFF Unplug Power Cord from the outlet and coil around PowerPump Belt Replacement With the unit still on its side, loop one end To Install the Replacement Pump BeltSmartMix Bottle and Belt Access Door see illustration Assembly is now completeReduced Spray or No Spray TroubleshootingRefill Bladder with clean hand hot tap water Clean out Flow Indicator Filter,Am 4 pm Bissell Consumer ServicesIf your Bissell product should require service Am 5 pmLimited Two Year Warranty About Your Warranty
Related manuals
Manual 17 pages 40.87 Kb Manual 22 pages 62.08 Kb

1698 specifications

The Bissell 1698 is a powerful and versatile carpet cleaner designed to tackle tough stains and maintain your home's cleanliness. Known for its effective cleaning capabilities, this model combines innovative technologies with user-friendly features, making it a preferred choice for many homeowners.

One of the standout features of the Bissell 1698 is its advanced cleaning system, which utilizes a combination of heat and powerful suction to lift and eliminate dirt, stains, and odor from carpets and upholstery. Its Heatwave Technology helps maintain consistent water temperature, which is crucial for achieving optimal cleaning results. When paired with Bissell's specially formulated cleaning solutions, this model effectively breaks down and removes embedded dirt and stains, leaving carpets looking refreshed.

The machine is also equipped with a large water tank, allowing for extended cleaning sessions without frequent refills. The dual-tank system separates clean and dirty water, ensuring that you are always using fresh, hot water when cleaning. This efficient design contributes to a more hygienic cleaning process, as dirty water is kept isolated from the clean solution.

Another important characteristic of the Bissell 1698 is its lightweight and compact design, making it easy to maneuver around furniture and tight spaces. The included 4-foot hose and specialized attachment tools allow for targeted cleaning in areas such as stairs, upholstery, and upholstery. The powerful rotating brush roll not only deep cleans carpets but also lifts pet hair and debris from the fibers, making it an ideal choice for pet owners.

User convenience is further enhanced by the easy-to-use controls and quick assembly process, allowing you to set up and start cleaning in no time. The machine also features a washable filter, which simplifies maintenance and prolongs the unit's lifespan.

In conclusion, the Bissell 1698 is a top-tier carpet cleaner that combines powerful cleaning technology with user-friendly features. Its Heatwave Technology, dual-tank system, and lightweight design make it an efficient choice for maintaining a clean and fresh home. Whether you’re dealing with stubborn stains, pet hair, or general messes, the Bissell 1698 is equipped to meet your cleaning needs with ease and effectiveness.