Replace Dust Bag
Use only BISSELL® Style 2 Dust Bags in your Upright Vacuum Cleaner. To maintain peak vacuum efficiency, you should check the Dust Bag weekly, and replace it when it is no more than half full.
Never reuse a paper Dust Bag.
1. Unplug cleaner from electrical outlet
2. Unzip Cloth Bag.
3. Grasp paper Dust Bag and Bag Collar, pull used Dust Bag from Connector Tube, and dispose of Dust Bag.
4. Fold down top of new Dust Bag.
5. Grasp Bag Collar and push Collar firmly over raised rib on Connector Tube. Pushing too hard on the Collar may rip the Dust Bag.
6. Tuck remainder of Dust Bag completely into vacuum cleaner. Lay it flat, top to bottom, without bunching.
7. Zip Cloth Bag closed.
Check Rotating Brush and Drive Belt
5
6
You should check your vacuum cleaner’s Drive Belt and Rotating Floor Brush regularly for wear or damage. You should also clean the brush and brush ends of string, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet.
1. Unplug unit from electrical outlet.
2. Place Handle in Low Cleaning position and turn vacuum cleaner face down on floor.
3. Locate two Lock Tabs adjacent to forward wheels on removable Brush Cover. Using your fingers, press outward on each Lock Tab separately to remove Brush Cover.
WARNING: To
reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect Power Plug from electrical outlet.
Lock Tabs
3 |
9