Troubleshooting
Cleaner won’t run.
Possible Causes
1Power cord not plugged in
2Blown fuse/tripped breaker
Reduced spray or no spray.
Possible Causes
1Spray Nozzle clogged
2Clean/Solution Tank empty
3Clean/Solution Tank insert clogged
4Pump needs priming
Remedies
1Check electrical plug
2Replace household fuse or reset breaker
Remedies
1Clean Spray Nozzle
2Check/Refill Tank
3Clean insert at bottom of Clean/Solution Tank
4Gently lift Clean/Solution Tank up and down while depressing the Spray Trigger
OR Gently squeeze clean tank while depressing Spray Trigger
Deep Cleaner Won’t pick up cleaning solution.
Possible Cause
1Poor Upholstery/Carpet Tool position
2Dirty/Collection Tank is full
3Upholstery/Carpet Tool Brush worn
4Excess solution in Vacuum Flex Hose
5Incorrect Cleaning Formula
Remedies
1Reposition Upholstery/Carpet Tool on surface, follow recommended cleaning procedures
2Empty Dirty/Collection Tank
3Replace with new Brush
4Lift Tool and point upwards to allow water in
Hose to flow into the Dirty/Collection Tank
5Use BISSELL Little Green formula only
TurboBrush attachment-Brush will not turn.
Possible Causes | Remedies |
1 Incorrect switch position on TurboBrush | Reposition switch to Brush position |
| 1 |
No Suction on TurboBrush attachment.
Possible Causes | Remedies |
1 Incorrect switch position on TurboBrush | 1 Reposition switch to suction position |
10