Billy Goat HTR1803V Hose Operation Tips, Starting, Adjusting Hose Boom, Vacuuming Operation

Page 5

16OPERATION

INTENDED USE: This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.

Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose. Vacuuming cans, bottles and sand will affect the longevity of your machine.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING.

16.6HOSE OPERATION TIPS

THE HOSE IS A REPLACEABLE WEAR ITEM.

FOR BEST HOSE OPERATION RESULTS, FOLLOW THESE RECOMMENDATIONS.

Keep hose as straight as possible during operation for best pick-up and to avoid clogs.

Avoid sharp bends in hose which will reduce efficiency and may promote clogs.

NEVER DRAG HOSE. Always remove and store hose before transporting unit.

16.1STARTING

SECURE LOADER TO TAILGATE OR MOUNTING:

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the frame (18HP Twin on engine). Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

INTAKE HOSE: Must be attached to front plate to start engine.

CHOKE: Located on engine near engine throttle panel.

STOP SWITCH: Move to on position (when provided).

THROTTLE: Move remote throttle control to fast position. Pull starting rope to start engine.

IF YOUR UNIT FAILS TO START:

fig. 1

ADJUSTING HOSE BOOM:

Properly adjusting the boom will prevent most hose clogs from occurring and will give optimum vacuum performance by keeping hose straight next to housing (see fig. 2).

See Troubleshooting on page 12.

16.2VACUUMING OPERATION

EXHAUST FLAPPER: Discharging into enclosed container, position exhaust flapper to desired opening and secure adjustment knob before starting engine. NOTE: An enclosed container must capture all debris delivered into it preventing any debris from blowing back onto unit's engine (see page 1 optional accessories).

Hose

Boom Assembly after hose has been stretched.

Hose Bands.

Stretch hose

NOZZLE: With machine running and fully assembled, move nozzle in sweeping motions over debris. For maximum pickup, move nozzle close to debris, but without blocking air flow into the nozzle (see figure 1). NOTE: Never bury nozzle into debris.

fig. 2 out before clamping.

Part No. 811202

Page 5 of 12

Form No. F022404A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Form No. F022404A Optional AccessoriesA n k Yo u f o r S e l e c t i n g Vibration Table of ContentsSound Exhaust Elbow Boom Square Arm Boom Pivot WA PUT OIL in Engine Before StartingCoupler Weld Assy mm Coupler Weld Assy 254mm HTR Nozzle 8203mm TR 811007 Nozzle 10 254mm HTRInstruction Labels Parts BAG & Literature Assy P/NEngine Labels ControlsHose Operation Tips Adjusting Hose BoomStarting Vacuuming OperationOperation Unclogging a Clogged Housing or Exhaust ElbowUnclogging a Clogged Hose Hose LifeStorage Handling & TransportingEngine Disconnect Spark Plug Wire Before Servicing UnitImpeller Removal Maintenance Operation MaintenanceDate of Service Service Performed Maintenance intervalsParts Drawing Be purchased locally Parts ListDenotes standard Denotes parts found Hardware item that may 121 dB Troubleshooting

HTR1803V specifications

The Billy Goat HTR1803V is a state-of-the-art hydrostatic drive debris loader that epitomizes efficiency and performance in outdoor maintenance. This machine is specifically engineered for those who require a robust solution for clearing leaves, grass clippings, and other organic debris from their properties. With a myriad of features and innovative technologies, the HTR1803V stands out in the competitive landscape of commercial debris loaders.

One of the main features of the HTR1803V is its powerful 18 HP Honda engine. This commercial-grade engine provides the necessary horsepower to tackle even the toughest debris, ensuring that the loader operates smoothly under various conditions. The hydrostatic drive system offers excellent maneuverability and speed control, allowing operators to navigate around obstacles with ease while working efficiently.

The HTR1803V is equipped with an exceptional 3-in-1 collection system. This feature allows for vacuuming, mulching, and blowing debris, providing versatility in how waste can be managed. The mulching capability reduces the volume of debris, allowing for easy disposal or composting, while the powerful vacuum effectively collects materials without clogging, even in wet conditions.

Notably, the HTR1803V comes with a durable and long-lasting steel housing that can withstand the rigors of daily use. Its robust design minimizes maintenance needs, which is a significant advantage for commercial landscapers and maintenance crews. Moreover, the easy-to-empty debris bag makes the process of disposal quick and hassle-free, thereby improving productivity on the job site.

Additional technologies incorporated into the HTR1803V include a user-friendly control panel that makes operation intuitive, even for those new to debris loaders. The adjustable height feature on the loader’s intake allows operators to customize their approach depending on specific landscaping requirements, making it adaptable for different environments.

In conclusion, the Billy Goat HTR1803V is a powerful and versatile debris loader that meets the demands of commercial landscaping and maintenance services. With a strong engine, advanced collection capabilities, and a durable construction, this machine exemplifies quality and innovation in outdoor equipment. It is designed to enhance productivity and streamline the process of debris management, making it an invaluable tool for professionals in the field.
Top Page Image Contents