Billy Goat HTR1602V PUT OIL in Engine Before Starting, Nozzle 8203mm TR Nozzle 10 254mm HTR

Page 3

9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and Breathing protection is recom- mended when using this machine, especially in dry

and dusty conditions. Optional bag cover directs dust toward ground, away from the operator.

·DO NOT place hands or feet inside nozzle intake opening, near debris outlet or near any moving parts.

·DO NOT start engine without hose and exhaust elbow connected firmly in place to housing and exhaust outlet.

·DO NOT operate without discharging exhaust into enclosed container.

·DO NOT operate during excessive vibration.

·DO NOT remove hose until engine has been turned off and has come to a complete stop.

·DO NOT operate machine with hose or exhaust elbow removed. ·DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rock, glass, string like material, grain, rags, cans, metal, bark or water.

·DO NOT operate this machine on slopes greater than 20%. ·DO NOT pick up any hot or burning debris, or any toxic or explosive material.

·DO NOT allow children to operate this equipment.

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING.

Your Billy Goat is shipped from the factory in one carton and is completely assembled except for the exhaust elbow, exhaust flapper, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps and related hardware.

1.ASSEMBLE exhaust elbow (item 10), to main unit and firmly tighten knobs (item 13), that are preassembled to main unit.

2.ASSEMBLE flapper (item 8), to exhaust elbow (item 10), using carriage bolt (item 9), knob (item 7), washers (item 6) and lock washers (item 11).

3.SECURELY ATTACH unit to tailgate of a truck or to a trailer, so that the exhaust discharges into an enclosed container.

4.ATTACH hose to hose coupler (item 59), using hose clamp (item 60) NOTE: This unit is equipped with a unidirectional hose. Assemble hose so that interior hose material seams face toward unit.

5.ASSEMBLE hose to housing of main unit and securely tighten knob (item 13), that is preassembled to housing front plate.

6.ASSEMBLE handle loop nozzle (item 82), to nozzle handle using screw cap (item 80), washer (item 6) and lock nut (item 5). Adjust handle loop to desired height and angle and securely tighten in place.

7.ASSEMBLE nozzle handle (item 78), to nozzle (item 77), using screws (item 80), washers (item 79), washers (item 4) and lock nuts (item 5).

8.ATTACH assembled nozzle to hose using hose clamp (item 60). Before tightening hose clamp, position nozzle handle upward when hose is stretched to prevent twisting load on hose assembly during operation.

9.ASSEMBLE tube square boom (item 51), to boom pivot (item 50), using chain loop assembly (item 54), washers (item 4) and lock nut (item 52).

10.ASSEMBLE remaining chain loop assembly (item 54), to end of tube square boom (item 51) using washer (item 4) and lock nut (item 52).

11.SLIDE boom assembly into square tube on front of housing.

12.ASSEMBLE hose bands (item 56) around hose and onto chain loop assemblies on boom assembly using screws (item 55) and lock nuts (item 52) (see ADJUSTING HOSE BOOM on page 5).

11PACKING CHECKLIST

TR MODELS

Briggs & Stratton 11 HP

Honda 13 HP

HTR MODELS

Briggs & Stratton

Vanguard-Twin 16 HP

Per Model

Hose 8"x 12.5' TR

P/N 810523

Hose 10"x 12.5' HTR

P/N 810705

Handle Loop Nozzle

P/N 811019

Parts Bag &

Literature Assy

P/N 811065

Parts Bag

&Literature Assy

Engine

Manual Per

Model

These items should be included in your carton. If any of these parts are missing, contact your dealer.

10

51

50

56

59

60

78

77

Boxing Checklist

Check

Per Model

Exhaust Elbow TR 811191

Exhaust Elbow HTR 811196

Boom Square Arm 810875

Boom Pivot WA 810870

Per Model

Band Hose Boom 8" (203mm) TR 810880 Qty. 2

Band Hose Boom 10" (254mm) HTR 810868 Qty. 2

Per Model

Coupler Weld Assy. 8"(203mm)

TR 811170

Coupler Weld Assy. 10" (254mm)

HTR 811179

Per Model

Hose Clamps 8"(203mm) TR

810566 Qty. 2

Hose Clamps 10" (254mm) HTR

810706 Qty. 2

Handle Nozzle 811020

TR and HTR

Per Model

Nozzle 8"(203mm) TR 811007

Nozzle 10" (254mm) HTR 811005

Part No. 811202

Page 3 of 12

Form No. F072402A

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Specifications Table of Contents Sound8VIBRATION PUT OIL in Engine Before Starting Coupler Weld Assy mm Coupler Weld Assy 254mm HTRNozzle 8203mm TR Nozzle 10 254mm HTR Controls Parts BAG & Literature Assy P/NInstruction Labels Engine LabelsVacuuming Operation Adjusting Hose BoomHose Operation Tips StartingHeavy Debris Removal Unclogging a Clogged Housing or Exhaust ElbowUnclogging a Clogged Hose Hose LifeStorage Handling & TransportingDisconnect Spark Plug Wire Before Servicing Unit Impeller RemovalEngine Interlock System Maintenance OperationDate of Service Service Performed Maintenance intervalsParts Drawing Parts List Denotes standard Denotes parts found Hardware item that mayBe purchased locally Troubleshooting

HTR1602V specifications

The Billy Goat HTR1602V is a high-performance lawn and litter vacuum designed to deliver efficient and effective debris cleanup for residential and commercial applications. It boasts a powerful 16 horsepower Vanguard engine, enabling it to effortlessly handle a variety of tasks, from clearing leaves to managing grass clippings. With its robust construction and user-friendly design, the HTR1602V stands out in a crowded market of outdoor power equipment.

One of the main features of the HTR1602V is its impressive suction capability. The vacuum is equipped with a patented debris management system, which includes a unique oscillating step that ensures maximum extraction of litter. This system allows for efficient collection of both large and small debris, making it ideal for any lawn or landscape condition. The HTR1602V also includes a large, durable collection bag with a generous capacity, reducing the need for frequent emptying and allowing users to cover more ground in less time.

The HTR1602V is designed with operator comfort in mind. It features an ergonomic handle that minimizes operator fatigue, even during extended use. Additionally, the machine is equipped with a quick-release bag mechanism, streamlining the process of emptying and reducing downtime. The vacuum's wide, heavy-duty wheels provide excellent maneuverability over rough terrain, while the rugged construction ensures durability and longevity even in demanding environments.

In terms of technology, the Billy Goat HTR1602V integrates advanced engineering that maximizes performance and efficiency. The Vanguard engine, renowned for its reliability, provides consistent power and fuel efficiency. The machine's design incorporates a low center of gravity, enhancing stability and control, especially on slopes or uneven surfaces.

Furthermore, the HTR1602V includes variable speed controls, allowing users to adjust the vacuum's power to suit various conditions and debris types. It has a compact footprint, making it easy to store and transport, yet it does not compromise on performance.

In conclusion, the Billy Goat HTR1602V is an exceptional lawn and litter vacuum that combines power, efficiency, and user-friendly features. Whether for commercial landscaping or residential yard maintenance, this versatile machine meets a range of needs, providing quick and thorough cleanup capabilities. With its durable build and advanced technologies, the HTR1602V continues to be a top choice for professionals and homeowners alike.
Top Page Image Contents