GE GN94ENSRSA, GP94ENSRSA, GN75ENSRSA Planning for Plumbing, Shown with optional pipe cover

Page 7

Installation Instructions

PLANNING FOR PLUMBING

(shown with optional pipe cover)

Unit

18″ min.

61⁄2″

 

7″

 

 

12″

41⁄2″

 

97⁄8″

 

Water and gas

33⁄8″

through the wall *

 

9″

36″ min.

Optional Pipe Cover (AGTPCM) shown shaded.

Pipe cover not required, However, consideration should be taken in the design of the rough plumbing to allow installation of unit and pipe cover

21⁄2″

21⁄2″

21⁄2″

Ground

*Suggested area for Water and Gas lines to come through the wall to allow the optional pipe cover to be installed if desired.

The center of the pipes can be placed anywhere within the shaded area. The center of the pipes is recommended to be protruding only within 6″ of the mounting wall. Other specific installations may be different.

Be sure that the minimum elevation of the bottom of the unit is 18″ to meet the 36″ recommended clearance for the exhaust.

CAUTION: BURN HAZARD. Hot exhaust and vent may cause serious burns. Keep back from water heater unit. Keep small children and animals away from unit.

CAUTION: Hot Water outlet pipes leaving unit can be hot to touch. Insulation must be used for hot water pipes below 36″ due to burn risk to children.

NOTE: It is recommended to install the bottom

of the unit at least 18″ off the ground to minimize blockage and maintenance from debris and provide room for the optional Pipe Cover Accessory Model Number AGTPCM.

NOTE: Do not install electrical outlet directly below unit. Electrical outlet must be installed less than 6 feet from unit.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Safety Precautions Before BeginninginstallationModels GN75ENSRSA, GN94ENSRSA, GP94ENSRSA Safety Precautions Installation InstructionsTools YOU will Need Parts ProvidedDescription DimensionsFlue Terminal Clearances Additional Clearances Vent Terminal Shown with optional pipe cover Planning for PlumbingMounting the Water Heater Clearances for Water HeaterCorrosive Atmospheres Mounting the Water HeaterMounting the Waterheater GAS Piping GAS PipingConnecting the Water Heater to the GAS Supply Internal BUILT-IN Freeze Protection Water PipingWater Piping Pressure Relief ValveSupplemental Freeze Protection Connecting the Water Heater to the Water SupplyKEY Recommended Piping for Basic InstallationFreeze Protection For External Piping Electrical Requirements Electrical Connection InformationGuidelines High Altitude InstallationsMounting the Controller Remote Controller InstallationConfigurations LocationCleaning the Inlet Filter Cleaning the Inlet FilterInstallation Checklist Pressure Drop Curve Technical DataOutlet Flow Data Ladder Diagram Page

GN75ENSRSA, GN94ENSRSA, GP94ENSRSA specifications

The GE GN94ENSRSA, GP94ENSRSA, and GN75ENSRSA represent a new generation of advanced gas turbines developed by General Electric (GE) for use in power generation applications. These models are designed for efficiency, reliability, and environmental sustainability, making them ideal for both industrial and utility-scale projects.

A hallmark of these turbines is their high efficiency. GE has implemented cutting-edge aerodynamics and materials technology to create a combustion process that maximizes energy extraction while minimizing fuel consumption. The GN94ENSRSA and GP94ENSRSA models specifically feature advanced compressor designs that increase air intake and compression ratio, enhancing overall performance.

The turbines incorporate GE's Digital Wind Farm technology, which utilizes advanced data analytics and machine learning to optimize operational efficiency. This technology allows for predictive maintenance, reducing downtime and operational costs. Users can monitor turbine performance in real-time, making adjustments as needed to boost output and efficiency.

Another significant feature is the flexible fuel capability. The GN94ENSRSA and GP94ENSRSA can operate with various fuel types, including natural gas, biogas, and hydrogen, making them versatile solutions for a range of energy markets. This flexibility aligns with global trends toward cleaner energy, helping reduce carbon emissions.

Safety and reliability are at the forefront of GE's design philosophy. The turbines are equipped with multiple safety features to ensure stable operation even under extreme conditions. This includes advanced control systems that continuously monitor critical parameters and adjust operations to maintain performance and safety standards.

In terms of emissions, GE has prioritized the development of low-emission technologies. These turbines are designed to meet stringent environmental regulations, reducing nitrogen oxides (NOx) and carbon monoxide (CO) emissions through enhanced combustion technology. This commitment to environmental sustainability has made GE’s turbines a preferred choice for many energy providers looking to transition to cleaner forms of power generation.

In summary, the GE GN94ENSRSA, GP94ENSRSA, and GN75ENSRSA gas turbines exemplify the latest advancements in turbine technology. With their high efficiencies, flexible fuel options, robust safety features, and commitment to reducing emissions, these models underscore GE's leadership in the energy sector and its dedication to sustainable power solutions. As global energy demands continue to evolve, these turbines provide a reliable path forward for efficient and responsible power generation.
Top Page Image Contents