Rheem Commercial Gas Water Heater manual Available in 75 GallonTank-Type Models

Page 1

PowerVentCommercial Gas Water Heaters

Available in 75 GallonTank-Type Models

￿75,000 BTU/Hr.

The Rheem-Ruud PowerVent commercial water heater is specifically designed to fill the need wherever medium quantities of hot water are required. Typical applications include large residences, small restaurants, apartments up to

6 units and small office buildings.

Construction Features:

75Gallon Capacity

Vents Up To

34 Feet Using

3" PVC Pipe

And Up To

95 Feet Using

4" PVC Pipe

Long life tank design – proprietary steel formulation with a unique coat of high temperature porcelain enamel to maximize corrosion resistance resulting in a superior tank design.

Guardian System

Air/ fuel shut-off system offers double protection

Maintenance free – no filter to clean

Flammable Vapor

Detection Sensor

Protective control system that disables the heater in the presence of flammable vapor accumulation

Flexible Venting Options

Long venting lengths up to 100 feet

PVC, ABS, or CPVC vent pipe options

Vertical or horizontal termination

New Quiet Blower

• Less noise than ever before

Self-Diagnostic System

Integrated self-diagnostic system control takes the guess work away

Environmentally Friendly Burner

Low NOx design for low nitrous oxide emissions

High Altitude Compliant

Certified for applications

up to 7,700 feet above sea level

Longer Life

Patented magnesium anode rod design incorporates a special resistor that protects the tank from corrosion

Provides longer tank life than using standard magnesium anode rods

Additional Features

Durable silicon nitride ignitor (HSI)

Standard 110 volt electrical connection

Exceeds National Appliance Energy Conservation Act (NAECA) and ASHRAE requirements

Durable brass drain valve

Temperature and pressure relief valve

AGA/ASME rated and factory installed

Certifications and Ratings:

Efficiency – these models have been tested according to DOE test procedures, and meet or exceed thermal efficiency and standby loss requirements of current ASHRAE standards (Part of the Federally mandated Energy Policy Act (EPact) and NRCAN). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC).

Safety and construction – these products are design certified by

CSA Laboratories: a) To meet all safety and construction requirements of ANSI Z21.10.1. b) As an automatic storage water heater. c) For operation of combustible floors, in alcove, and closet installations. d) For combination water heating and space heating applications. All models are North Carolina Code compliant. Certified for a 150 PSI Maximum Working Pressure.

Continued on reverse.

Image 1
Contents Certifications and Ratings Available in 75 GallonTank-Type ModelsMaximum and Minimum Vent Lengths Recommended Specifications

Commercial Gas Water Heater specifications

Rheem Commercial Gas Water Heaters are engineered to meet the demanding hot water needs of commercial facilities, providing reliable performance, energy efficiency, and advanced technology features. Designed for various applications, including hotels, restaurants, and healthcare facilities, these water heaters deliver a steady supply of hot water while minimizing operational costs.

One of the key characteristics of Rheem's commercial gas water heaters is their advanced heat exchanger technology. The use of high-quality materials in the heat exchanger design ensures optimal heat transfer efficiency, which leads to faster heating times and reduced energy consumption. By utilizing a robust and durable construction, these water heaters are built to withstand the rigors of daily commercial use while maintaining high performance.

The Rheem Commercial Gas Water Heaters are also equipped with a range of innovative features that enhance user convenience and reliability. For instance, many models come with a built-in digital thermostat, allowing precise temperature control and monitoring. This feature not only enhances user comfort but also aids in maintaining safety standards, preventing overheating and scalding.

Another remarkable aspect of Rheem's gas water heaters is their smart technology integration. Models equipped with Wi-Fi connectivity enable remote monitoring and control through a mobile app, providing users with real-time updates and alerts. This connectivity facilitates predictive maintenance, allowing businesses to address potential issues before they escalate, thereby reducing downtime and repair costs.

Moreover, these water heaters boast a compact design, making them suitable for installation in space-restricted areas. Their versatility in installation options provides further flexibility, accommodating various commercial layouts and preferences.

Rheem's commitment to energy efficiency is also evident in their use of environmentally friendly manufacturing practices. Many units meet or exceed ENERGY STAR® certification, signifying reduced greenhouse gas emissions and energy savings. This not only benefits the environment but also contributes to lower utility bills for businesses.

In summary, Rheem Commercial Gas Water Heaters combine advanced technology, user-friendly features, and energy-efficient designs, making them an ideal choice for businesses seeking reliable hot water solutions. With their robust performance and innovative capabilities, Rheem water heaters ensure that commercial operations run smoothly and cost-effectively, meeting the ever-increasing demand for hot water in today’s fast-paced environments.