Cisco Systems 78-11180-01 Configuring the PIX, Connecting the Power Supply Module to the PIX

Page 5

Chapter 2 Installing a PIX Firewall

Installing a PIX 506

Step 2 The inside or outside network connections can be made to either interface port on the PIX 506. Connect the inside network cable to the interface connector marked ETHERNET 0 or ETHERNET 1. Connect the outside network cable to the remaining Ethernet port. Refer to the “Configuring the PIX 506” section for information on how to configure the ports.

Step 3 The PIX 506 uses an external AC to DC power supply. Power is supplied to the PIX 506 by connecting the power supply to the back of the PIX 506 and connecting a separate AC power cord to the power supply. Figure 2-4displays the cable connection from the power supply to the PIX 506, and displays the AC power cord connector (at the opposite end of the power supply).

Figure 2-4 Connecting the Power Supply Module to the PIX 506

ACT

LINK

ACT

 

 

 

LINK

 

 

 

 

 

 

ETHERNET 1

ETHERNET 0

USB

CONSOLE

 

 

DC

POWER

INPUT

38854

Power supply

Step 4 When you are ready to start the PIX 506, power on the unit from the switch at the rear of the unit.

Configuring the PIX 506

If needed, you can use the PFSS (PIX Firewall Syslog Server) with the PIX 506. Refer to Chapter 4, “Installing the PIX Firewall Syslog Server (PFSS),” for more information on the installation and use of PFSS.

The PIX Firewall Setup Wizard provides an easy-to-use interface for building the initial PIX Firewall configuration. For more information on the PIX Firewall Setup Wizard, see Chapter 9, “Installing the PIX Firewall Setup Wizard.”

For more configuration information, refer to the Cisco PIX Firewall Configuration Guide, Version 5.2, which is available in your accessory kit or online at the following site:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_book09186 a00801027d5.html

Always check the release notes first before configuring the PIX Firewall for the latest release details. This document is also in your accessory kit or you can view it online at the following site:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/prod_release_notes_list.html

Installation Guide for the Cisco Secure PIX Firewall Version 5.2

 

78-11180-01

2-5

 

 

 

Image 5
Contents Follow these steps to install a PIX Firewall Installation OverviewPerimeter Before You Begin the InstallationIntroduction Installing a PIXComputer serial port DB-9 or DB-25 PIX 506 Installation StepsConnecting the Power Supply Module to the PIX Configuring the PIXPIX 515 Front Panel LEDs PIX 515 Features Rack Mounting Mounting the PIXVertical Mounting PIX 515 Installation StepsPIX 515 Serial Console Cable PIX 515 Feature Licenses 12 PIX Rear panel of the PIX 525 is shown in Figure14 PIX 525 Front Panel LEDs 16 PIX 525 Rear Panel PIX 525 Installation StepsConfiguring the PIX PIX 520 or Earlier Model Installation Instructions Installing a PIX 520 or Earlier ModelPIX 525 Feature Licenses Front 18lists the controls on earlier PIX Firewall models PIX Firewall with a Four-Port Interface Card 20 Four-Port Ethernet Interface Installed in SlotInstalling Interface Cables to a PIX 520 or Earlier Model 23 PIX Firewall Serial Cable Assembly An example of the first messages displayed are as follows Startup MessagesFirst Messages PIX Firewall then continues the startup messages as follows After the PromptsPIX Firewall then displays the following message IRQ9 PIX Firewall then displays the following messages Pixboothelper f pix-5.2.1-release Example startup messages continue Configuration Version MessageBoothelper Installation Software Installation NotesDd bs=18b if=./bh521.bin of=/dev/rd0 Following is an example session Downloading a Software Image over TftpUsing the copy tftp flash Command Using Tftp CommandsExamples Using the monitor Command Installing a PIX Firewall Software Installation Notes Following is an example of the download screen display Use of the monitor command continuesRequest timed out Tftp Download Error CodesTftp packet Protocol used by TftpUpgrading the Activation Key

78-11180-01 specifications

Cisco Systems 78-11180-01 is an advanced networking device designed to support a wide range of enterprise networking needs. Known for its reliability and scalability, this device is an integral part of Cisco's robust portfolio, enabling organizations to optimize their network performance while ensuring security and manageability.

One of the standout features of the 78-11180-01 is its support for advanced routing and switching capabilities. The device is built to handle a large volume of data traffic, making it suitable for medium to large-sized businesses. It employs Cisco's proprietary software, which enhances routing efficiency and drives faster data transmission across the network, ensuring that users experience minimal latency during operations.

In addition to routing capabilities, the 78-11180-01 integrates various technologies designed to promote seamless wireless connectivity. This includes support for multiple WLANs, allowing businesses to create tailored networks for different departments or user groups. This feature not only maximizes resource allocation but also improves the user experience by providing dedicated bandwidth for critical operations.

Security remains a top priority, and Cisco’s 78-11180-01 is equipped with robust security protocols. It supports advanced encryption standards, ensuring that sensitive data transmitted across the network is safeguarded against potential threats. Integrating with Cisco's Security suite allows for comprehensive threat management, equipping businesses with tools to detect and respond to security incidents in real time.

Moreover, the characteristic of scalability in the 78-11180-01 provides organizations with the flexibility to grow their network as their needs evolve. Whether expanding on-premises infrastructure or integrating cloud-based resources, this device facilitates easy connectivity and management of additional devices, ensuring that performance remains consistent.

Management is simplified through Cisco's user-friendly interface, which provides real-time insights into network performance. Administrators can easily monitor traffic patterns, identify bottlenecks, and make informed decisions to optimize network settings. Automated alerts and reporting tools further enhance proactive management capabilities.

In summary, Cisco Systems 78-11180-01 stands out as a versatile networking solution, combining powerful routing and switching, robust security measures, seamless wireless capabilities, and user-friendly management features. This makes it an ideal choice for enterprises seeking to enhance their network infrastructure while explicitly focusing on growth and security.